make check-install fails with HDF5 1.8.13

Dear all,

I have just installed the HDF5 version 1.8.13 and the check-install process
failed with:

···

============================
Testing run-fortran-ex.sh

################# h5_crtdat #################
error: can't open file h5_crtdat.o for write
compilation aborted for h5_crtdat.f90 (code 1)
messed up compiling h5_crtdat.f90
rm: cannot remove `*.o': No such file or directory
rm: cannot remove `*.h5': No such file or directory

make[3]: *** [installcheck-local] Error 1
make[3]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran/examples'
make[2]: *** [installcheck-local] Error 1
make[2]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran'
make[1]: *** [installcheck-recursive] Error 1
make[1]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran'
make: *** [installcheck-recursive] Error 1

Regards,

Ekin

On 15 May 2014 15:20, <help@hdfgroup.org> wrote:

To view from a browser see:
   http://www.hdfgroup.org/newsletters/newsletter140.html

--------------------------------------------------------------------------
The HDF Group Home Page: http://www.hdfgroup.org/
Support Services: http://www.hdfgroup.org/services/
--------------------------------------------------------------------------

                            Newsletter #140
                             May 15, 2014

CONTENTS
. Release of HDF5-1.8.13

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Release of HDF5 1.8.13

The HDF5-1.8.13 release is now available, and can be downloaded from the
HDF Group Downloads page:

    http://www.hdfgroup.org/downloads/

It can also be obtained directly from:

    http://www.hdfgroup.org/HDF5/release/obtain5.html

HDF5-1.8.13 is a minor release, with a few new features and changes.
Important changes include:

o The H5free_memory (C) api was added to free memory that was allocated
   by HDF5 API calls. This was added specifically for Windows, but may be
   useful anywhere that the library uses a different memory manager than
   the application.

o New wrappers were added for C++ (many) and Fortran
   (h5pset_file_image_f and h5pget_file_image_f).

o Mac OS X 10.9 Mavericks is now supported.

o Many improvements were added in support of CMake, including the
   addition of support for CMake 2.8.11.

o Improvements were added to the Core VFD (or Memory VFD).

o The following changes were made to Parallel HDF5:

   - The MPI-POSIX VFD was removed. Application developers should
     always use the MPI-IO VFD.

   - Parallel HDF5 now supports collective I/O on point selections.

o A few changes were added to the tools (h5diff, h5dump, and h5repack).

This release contains many other changes that are not listed here.
Please be sure to read the Release Notes for a comprehensive list of
new features and changes:

   http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.13-RELEASE.txt

Changes that affect maintainers of HDF5-dependent applications are
listed in "HDF5 Software Changes from Release to Release". See:

   http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html

Future Changes to Supported Platforms
-------------------------------------

Please be aware that after this release, we will be moving to
CMake 3.0, and will add testing for VS 2013. VS 2012 will remain
the standard.

In addition, we will only support Cygwin built with CMake, and will
be dropping VS 2010.

-------------------------------------------------------------
For questions regarding these or other HDF issues, contact:

   help@hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-
forum_lists.hdfgroup.org

Ekin,

Could you please provide OS and compiler information? It would also help if you post the outputs of the commands used to build and install the HDF5 libraries.

Thank you!

Elena

···

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Elena Pourmal The HDF Group http://hdfgroup.org
1800 So. Oak St., Suite 203, Champaign IL 61820
217.531.6112
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

On May 15, 2014, at 9:10 AM, Ekin Akoglu <ekin@ims.metu.edu.tr> wrote:

Dear all,

I have just installed the HDF5 version 1.8.13 and the check-install process failed with:

============================
Testing run-fortran-ex.sh

################# h5_crtdat #################
error: can't open file h5_crtdat.o for write
compilation aborted for h5_crtdat.f90 (code 1)
messed up compiling h5_crtdat.f90
rm: cannot remove `*.o': No such file or directory
rm: cannot remove `*.h5': No such file or directory

make[3]: *** [installcheck-local] Error 1
make[3]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran/examples'
make[2]: *** [installcheck-local] Error 1
make[2]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran'
make[1]: *** [installcheck-recursive] Error 1
make[1]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran'
make: *** [installcheck-recursive] Error 1

Regards,

Ekin

On 15 May 2014 15:20, <help@hdfgroup.org> wrote:

To view from a browser see:
   http://www.hdfgroup.org/newsletters/newsletter140.html

--------------------------------------------------------------------------
The HDF Group Home Page: http://www.hdfgroup.org/
Support Services: http://www.hdfgroup.org/services/
--------------------------------------------------------------------------

                            Newsletter #140
                             May 15, 2014

CONTENTS
. Release of HDF5-1.8.13

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Release of HDF5 1.8.13

The HDF5-1.8.13 release is now available, and can be downloaded from the
HDF Group Downloads page:

    http://www.hdfgroup.org/downloads/

It can also be obtained directly from:

    http://www.hdfgroup.org/HDF5/release/obtain5.html

HDF5-1.8.13 is a minor release, with a few new features and changes.
Important changes include:

o The H5free_memory (C) api was added to free memory that was allocated
   by HDF5 API calls. This was added specifically for Windows, but may be
   useful anywhere that the library uses a different memory manager than
   the application.

o New wrappers were added for C++ (many) and Fortran
   (h5pset_file_image_f and h5pget_file_image_f).

o Mac OS X 10.9 Mavericks is now supported.

o Many improvements were added in support of CMake, including the
   addition of support for CMake 2.8.11.

o Improvements were added to the Core VFD (or Memory VFD).

o The following changes were made to Parallel HDF5:

   - The MPI-POSIX VFD was removed. Application developers should
     always use the MPI-IO VFD.

   - Parallel HDF5 now supports collective I/O on point selections.

o A few changes were added to the tools (h5diff, h5dump, and h5repack).

This release contains many other changes that are not listed here.
Please be sure to read the Release Notes for a comprehensive list of
new features and changes:

   http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.13-RELEASE.txt

Changes that affect maintainers of HDF5-dependent applications are
listed in "HDF5 Software Changes from Release to Release". See:

   http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html

Future Changes to Supported Platforms
-------------------------------------

Please be aware that after this release, we will be moving to
CMake 3.0, and will add testing for VS 2013. VS 2012 will remain
the standard.

In addition, we will only support Cygwin built with CMake, and will
be dropping VS 2010.

-------------------------------------------------------------
For questions regarding these or other HDF issues, contact:

   help@hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

Dear Elena,

The OS is 64-bit Debian Wheezy 7.5. The compiler is Intel Fortran Compiler
2013 SP1 Update 3, which is exactly 14.0.3 20140422. My GCC version is
4.7.2. I built and installed HDF5 as follows:

$ ./configure --prefix=/usr/local/hdf5-1.8.13 --enable-fortran
--enable-fortran2003
$ make
$ make check
# make install
$ make check-install

Everything except the "make check-install" step worked flawlessly.

Thank you.

Kind regards,

Ekin

···

On 15 May 2014 17:11, Elena Pourmal <epourmal@hdfgroup.org> wrote:

Ekin,

Could you please provide OS and compiler information? It would also help
if you post the outputs of the commands used to build and install the HDF5
libraries.

Thank you!

Elena
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Elena Pourmal The HDF Group http://hdfgroup.org
1800 So. Oak St., Suite 203, Champaign IL 61820
217.531.6112
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

On May 15, 2014, at 9:10 AM, Ekin Akoglu <ekin@ims.metu.edu.tr> wrote:

Dear all,

I have just installed the HDF5 version 1.8.13 and the check-install
process failed with:

============================
Testing run-fortran-ex.sh

################# h5_crtdat #################
error: can't open file h5_crtdat.o for write
compilation aborted for h5_crtdat.f90 (code 1)
messed up compiling h5_crtdat.f90
rm: cannot remove `*.o': No such file or directory
rm: cannot remove `*.h5': No such file or directory

make[3]: *** [installcheck-local] Error 1
make[3]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran/examples'
make[2]: *** [installcheck-local] Error 1
make[2]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran'
make[1]: *** [installcheck-recursive] Error 1
make[1]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran'
make: *** [installcheck-recursive] Error 1

Regards,

Ekin

On 15 May 2014 15:20, <help@hdfgroup.org> wrote:

To view from a browser see:
   http://www.hdfgroup.org/newsletters/newsletter140.html

------------------------------------------------------------
--------------
The HDF Group Home Page: http://www.hdfgroup.org/
Support Services: http://www.hdfgroup.org/services/
------------------------------------------------------------
--------------

                            Newsletter #140
                             May 15, 2014

CONTENTS
. Release of HDF5-1.8.13

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-

Release of HDF5 1.8.13

The HDF5-1.8.13 release is now available, and can be downloaded from the
HDF Group Downloads page:

    http://www.hdfgroup.org/downloads/

It can also be obtained directly from:

    http://www.hdfgroup.org/HDF5/release/obtain5.html

HDF5-1.8.13 is a minor release, with a few new features and changes.
Important changes include:

o The H5free_memory (C) api was added to free memory that was allocated
   by HDF5 API calls. This was added specifically for Windows, but may be
   useful anywhere that the library uses a different memory manager than
   the application.

o New wrappers were added for C++ (many) and Fortran
   (h5pset_file_image_f and h5pget_file_image_f).

o Mac OS X 10.9 Mavericks is now supported.

o Many improvements were added in support of CMake, including the
   addition of support for CMake 2.8.11.

o Improvements were added to the Core VFD (or Memory VFD).

o The following changes were made to Parallel HDF5:

   - The MPI-POSIX VFD was removed. Application developers should
     always use the MPI-IO VFD.

   - Parallel HDF5 now supports collective I/O on point selections.

o A few changes were added to the tools (h5diff, h5dump, and h5repack).

This release contains many other changes that are not listed here.
Please be sure to read the Release Notes for a comprehensive list of
new features and changes:

   http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.13-RELEASE.txt

Changes that affect maintainers of HDF5-dependent applications are
listed in "HDF5 Software Changes from Release to Release". See:

   http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html

Future Changes to Supported Platforms
-------------------------------------

Please be aware that after this release, we will be moving to
CMake 3.0, and will add testing for VS 2013. VS 2012 will remain
the standard.

In addition, we will only support Cygwin built with CMake, and will
be dropping VS 2010.

-------------------------------------------------------------
For questions regarding these or other HDF issues, contact:

   help@hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-
forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org

http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org

http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

Ekin,

It looks like that for some reason Fortran compiler cannot write *.o file. Could it be that you ran out of space? Is there quota on your system? Was /tmp partition full?

I would try to run make check-install the second time, or go to /usr/local/hdf5-1.8.13/share/hdf5_examples/fortran and try to run the following command

../../../bin/h5fc -o h5_crtdat h5_crtdat.f90

and see if it works.

Elena

···

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Elena Pourmal The HDF Group http://hdfgroup.org
1800 So. Oak St., Suite 203, Champaign IL 61820
217.531.6112
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

On May 15, 2014, at 10:30 AM, Ekin Akoglu <ekin@ims.metu.edu.tr> wrote:

Dear Elena,

The OS is 64-bit Debian Wheezy 7.5. The compiler is Intel Fortran Compiler 2013 SP1 Update 3, which is exactly 14.0.3 20140422. My GCC version is 4.7.2. I built and installed HDF5 as follows:

$ ./configure --prefix=/usr/local/hdf5-1.8.13 --enable-fortran --enable-fortran2003
$ make
$ make check
# make install
$ make check-install

Everything except the "make check-install" step worked flawlessly.

Thank you.

Kind regards,

Ekin

On 15 May 2014 17:11, Elena Pourmal <epourmal@hdfgroup.org> wrote:
Ekin,

Could you please provide OS and compiler information? It would also help if you post the outputs of the commands used to build and install the HDF5 libraries.

Thank you!

Elena
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Elena Pourmal The HDF Group http://hdfgroup.org
1800 So. Oak St., Suite 203, Champaign IL 61820
217.531.6112
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

On May 15, 2014, at 9:10 AM, Ekin Akoglu <ekin@ims.metu.edu.tr> wrote:

Dear all,

I have just installed the HDF5 version 1.8.13 and the check-install process failed with:

============================
Testing run-fortran-ex.sh

################# h5_crtdat #################
error: can't open file h5_crtdat.o for write
compilation aborted for h5_crtdat.f90 (code 1)
messed up compiling h5_crtdat.f90
rm: cannot remove `*.o': No such file or directory
rm: cannot remove `*.h5': No such file or directory

make[3]: *** [installcheck-local] Error 1
make[3]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran/examples'
make[2]: *** [installcheck-local] Error 1
make[2]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran'
make[1]: *** [installcheck-recursive] Error 1
make[1]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran'
make: *** [installcheck-recursive] Error 1

Regards,

Ekin

On 15 May 2014 15:20, <help@hdfgroup.org> wrote:

To view from a browser see:
   http://www.hdfgroup.org/newsletters/newsletter140.html

--------------------------------------------------------------------------
The HDF Group Home Page: http://www.hdfgroup.org/
Support Services: http://www.hdfgroup.org/services/
--------------------------------------------------------------------------

                            Newsletter #140
                             May 15, 2014

CONTENTS
. Release of HDF5-1.8.13

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Release of HDF5 1.8.13

The HDF5-1.8.13 release is now available, and can be downloaded from the
HDF Group Downloads page:

    http://www.hdfgroup.org/downloads/

It can also be obtained directly from:

    http://www.hdfgroup.org/HDF5/release/obtain5.html

HDF5-1.8.13 is a minor release, with a few new features and changes.
Important changes include:

o The H5free_memory (C) api was added to free memory that was allocated
   by HDF5 API calls. This was added specifically for Windows, but may be
   useful anywhere that the library uses a different memory manager than
   the application.

o New wrappers were added for C++ (many) and Fortran
   (h5pset_file_image_f and h5pget_file_image_f).

o Mac OS X 10.9 Mavericks is now supported.

o Many improvements were added in support of CMake, including the
   addition of support for CMake 2.8.11.

o Improvements were added to the Core VFD (or Memory VFD).

o The following changes were made to Parallel HDF5:

   - The MPI-POSIX VFD was removed. Application developers should
     always use the MPI-IO VFD.

   - Parallel HDF5 now supports collective I/O on point selections.

o A few changes were added to the tools (h5diff, h5dump, and h5repack).

This release contains many other changes that are not listed here.
Please be sure to read the Release Notes for a comprehensive list of
new features and changes:

   http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.13-RELEASE.txt

Changes that affect maintainers of HDF5-dependent applications are
listed in "HDF5 Software Changes from Release to Release". See:

   http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html

Future Changes to Supported Platforms
-------------------------------------

Please be aware that after this release, we will be moving to
CMake 3.0, and will add testing for VS 2013. VS 2012 will remain
the standard.

In addition, we will only support Cygwin built with CMake, and will
be dropping VS 2010.

-------------------------------------------------------------
For questions regarding these or other HDF issues, contact:

   help@hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

Dear Elena,

Changing to the directory hdf5-1.8.13/fortran/examples and then issuing

$ h5fc -o h5_crtdat h5_crtdat.f90

works. However, the check-install complains about not being able to open
h5_crtdat.o to write, which already exists. I checked the permissions of
that file and they are correct: 644, so write is allowed.

Do you have an idea?

Thank you,

Ekin

···

On 15 May 2014 19:47, Elena Pourmal <epourmal@hdfgroup.org> wrote:

Ekin,

It looks like that for some reason Fortran compiler cannot write *.o file.
Could it be that you ran out of space? Is there quota on your system? Was
/tmp partition full?

I would try to run make check-install the second time, or go to
/usr/local/hdf5-1.8.13/share/hdf5_examples/fortran and try to run the
following command

../../../bin/h5fc -o h5_crtdat h5_crtdat.f90

and see if it works.

Elena
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Elena Pourmal The HDF Group http://hdfgroup.org
1800 So. Oak St., Suite 203, Champaign IL 61820
217.531.6112
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

On May 15, 2014, at 10:30 AM, Ekin Akoglu <ekin@ims.metu.edu.tr> wrote:

Dear Elena,

The OS is 64-bit Debian Wheezy 7.5. The compiler is Intel Fortran Compiler
2013 SP1 Update 3, which is exactly 14.0.3 20140422. My GCC version is
4.7.2. I built and installed HDF5 as follows:

$ ./configure --prefix=/usr/local/hdf5-1.8.13 --enable-fortran
--enable-fortran2003
$ make
$ make check
# make install
$ make check-install

Everything except the "make check-install" step worked flawlessly.

Thank you.

Kind regards,

Ekin

On 15 May 2014 17:11, Elena Pourmal <epourmal@hdfgroup.org> wrote:

Ekin,

Could you please provide OS and compiler information? It would also help
if you post the outputs of the commands used to build and install the HDF5
libraries.

Thank you!

Elena
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Elena Pourmal The HDF Group http://hdfgroup.org
1800 So. Oak St., Suite 203, Champaign IL 61820
217.531.6112
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

On May 15, 2014, at 9:10 AM, Ekin Akoglu <ekin@ims.metu.edu.tr> wrote:

Dear all,

I have just installed the HDF5 version 1.8.13 and the check-install
process failed with:

============================
Testing run-fortran-ex.sh

################# h5_crtdat #################
error: can't open file h5_crtdat.o for write
compilation aborted for h5_crtdat.f90 (code 1)
messed up compiling h5_crtdat.f90
rm: cannot remove `*.o': No such file or directory
rm: cannot remove `*.h5': No such file or directory

make[3]: *** [installcheck-local] Error 1
make[3]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran/examples'
make[2]: *** [installcheck-local] Error 1
make[2]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran'
make[1]: *** [installcheck-recursive] Error 1
make[1]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran'
make: *** [installcheck-recursive] Error 1

Regards,

Ekin

On 15 May 2014 15:20, <help@hdfgroup.org> wrote:

To view from a browser see:
   http://www.hdfgroup.org/newsletters/newsletter140.html

------------------------------------------------------------
--------------
The HDF Group Home Page: http://www.hdfgroup.org/
Support Services: http://www.hdfgroup.org/
services/
------------------------------------------------------------
--------------

                            Newsletter #140
                             May 15, 2014

CONTENTS
. Release of HDF5-1.8.13

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- -

Release of HDF5 1.8.13

The HDF5-1.8.13 release is now available, and can be downloaded from the
HDF Group Downloads page:

    http://www.hdfgroup.org/downloads/

It can also be obtained directly from:

    http://www.hdfgroup.org/HDF5/release/obtain5.html

HDF5-1.8.13 is a minor release, with a few new features and changes.
Important changes include:

o The H5free_memory (C) api was added to free memory that was allocated
   by HDF5 API calls. This was added specifically for Windows, but may be
   useful anywhere that the library uses a different memory manager than
   the application.

o New wrappers were added for C++ (many) and Fortran
   (h5pset_file_image_f and h5pget_file_image_f).

o Mac OS X 10.9 Mavericks is now supported.

o Many improvements were added in support of CMake, including the
   addition of support for CMake 2.8.11.

o Improvements were added to the Core VFD (or Memory VFD).

o The following changes were made to Parallel HDF5:

   - The MPI-POSIX VFD was removed. Application developers should
     always use the MPI-IO VFD.

   - Parallel HDF5 now supports collective I/O on point selections.

o A few changes were added to the tools (h5diff, h5dump, and h5repack).

This release contains many other changes that are not listed here.
Please be sure to read the Release Notes for a comprehensive list of
new features and changes:

   http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.13-RELEASE.txt

Changes that affect maintainers of HDF5-dependent applications are
listed in "HDF5 Software Changes from Release to Release". See:

   http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html

Future Changes to Supported Platforms
-------------------------------------

Please be aware that after this release, we will be moving to
CMake 3.0, and will add testing for VS 2013. VS 2012 will remain
the standard.

In addition, we will only support Cygwin built with CMake, and will
be dropping VS 2010.

-------------------------------------------------------------
For questions regarding these or other HDF issues, contact:

   help@hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-
forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org

http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org

http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org

http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org

http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

Ekin,

Dear Elena,

Changing to the directory hdf5-1.8.13/fortran/examples and then issuing

$ h5fc -o h5_crtdat h5_crtdat.f90

works. However, the check-install complains about not being able to open h5_crtdat.o to write, which already exists. I checked the permissions of that file and they are correct: 644, so write is allowed.

Do you have an idea?

No idea at this point. We couldn't reproduce the problem here on one of our machines with Intel Fortran compiler.

Could you please try to run run-fortran-ex.sh in that directory?

./run-fortran-ex.sh

Thank you!

Elena

···

On May 15, 2014, at 1:42 PM, Ekin Akoglu <ekin@ims.metu.edu.tr> wrote:

Thank you,

Ekin

On 15 May 2014 19:47, Elena Pourmal <epourmal@hdfgroup.org> wrote:
Ekin,

It looks like that for some reason Fortran compiler cannot write *.o file. Could it be that you ran out of space? Is there quota on your system? Was /tmp partition full?

I would try to run make check-install the second time, or go to /usr/local/hdf5-1.8.13/share/hdf5_examples/fortran and try to run the following command

../../../bin/h5fc -o h5_crtdat h5_crtdat.f90

and see if it works.

Elena
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Elena Pourmal The HDF Group http://hdfgroup.org
1800 So. Oak St., Suite 203, Champaign IL 61820
217.531.6112
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

On May 15, 2014, at 10:30 AM, Ekin Akoglu <ekin@ims.metu.edu.tr> wrote:

Dear Elena,

The OS is 64-bit Debian Wheezy 7.5. The compiler is Intel Fortran Compiler 2013 SP1 Update 3, which is exactly 14.0.3 20140422. My GCC version is 4.7.2. I built and installed HDF5 as follows:

$ ./configure --prefix=/usr/local/hdf5-1.8.13 --enable-fortran --enable-fortran2003
$ make
$ make check
# make install
$ make check-install

Everything except the "make check-install" step worked flawlessly.

Thank you.

Kind regards,

Ekin

On 15 May 2014 17:11, Elena Pourmal <epourmal@hdfgroup.org> wrote:
Ekin,

Could you please provide OS and compiler information? It would also help if you post the outputs of the commands used to build and install the HDF5 libraries.

Thank you!

Elena
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Elena Pourmal The HDF Group http://hdfgroup.org
1800 So. Oak St., Suite 203, Champaign IL 61820
217.531.6112
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

On May 15, 2014, at 9:10 AM, Ekin Akoglu <ekin@ims.metu.edu.tr> wrote:

Dear all,

I have just installed the HDF5 version 1.8.13 and the check-install process failed with:

============================
Testing run-fortran-ex.sh

################# h5_crtdat #################
error: can't open file h5_crtdat.o for write
compilation aborted for h5_crtdat.f90 (code 1)
messed up compiling h5_crtdat.f90
rm: cannot remove `*.o': No such file or directory
rm: cannot remove `*.h5': No such file or directory

make[3]: *** [installcheck-local] Error 1
make[3]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran/examples'
make[2]: *** [installcheck-local] Error 1
make[2]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran'
make[1]: *** [installcheck-recursive] Error 1
make[1]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran'
make: *** [installcheck-recursive] Error 1

Regards,

Ekin

On 15 May 2014 15:20, <help@hdfgroup.org> wrote:

To view from a browser see:
   http://www.hdfgroup.org/newsletters/newsletter140.html

--------------------------------------------------------------------------
The HDF Group Home Page: http://www.hdfgroup.org/
Support Services: http://www.hdfgroup.org/services/
--------------------------------------------------------------------------

                            Newsletter #140
                             May 15, 2014

CONTENTS
. Release of HDF5-1.8.13

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Release of HDF5 1.8.13

The HDF5-1.8.13 release is now available, and can be downloaded from the
HDF Group Downloads page:

    http://www.hdfgroup.org/downloads/

It can also be obtained directly from:

    http://www.hdfgroup.org/HDF5/release/obtain5.html

HDF5-1.8.13 is a minor release, with a few new features and changes.
Important changes include:

o The H5free_memory (C) api was added to free memory that was allocated
   by HDF5 API calls. This was added specifically for Windows, but may be
   useful anywhere that the library uses a different memory manager than
   the application.

o New wrappers were added for C++ (many) and Fortran
   (h5pset_file_image_f and h5pget_file_image_f).

o Mac OS X 10.9 Mavericks is now supported.

o Many improvements were added in support of CMake, including the
   addition of support for CMake 2.8.11.

o Improvements were added to the Core VFD (or Memory VFD).

o The following changes were made to Parallel HDF5:

   - The MPI-POSIX VFD was removed. Application developers should
     always use the MPI-IO VFD.

   - Parallel HDF5 now supports collective I/O on point selections.

o A few changes were added to the tools (h5diff, h5dump, and h5repack).

This release contains many other changes that are not listed here.
Please be sure to read the Release Notes for a comprehensive list of
new features and changes:

   http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.13-RELEASE.txt

Changes that affect maintainers of HDF5-dependent applications are
listed in "HDF5 Software Changes from Release to Release". See:

   http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html

Future Changes to Supported Platforms
-------------------------------------

Please be aware that after this release, we will be moving to
CMake 3.0, and will add testing for VS 2013. VS 2012 will remain
the standard.

In addition, we will only support Cygwin built with CMake, and will
be dropping VS 2010.

-------------------------------------------------------------
For questions regarding these or other HDF issues, contact:

   help@hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

Dear Elena,

Running ./run-fortran-ex.sh gives a similar error:

################# h5_crtdat #################
./run-fortran-ex.sh: 57: ./run-fortran-ex.sh: ../../..//bin/h5fc: not found
messed up compiling h5_crtdat.f90
rm: cannot remove `*.o': No such file or directory
rm: cannot remove `*.h5': No such file or directory

However, I checked and h5fc is in my PATH.

Thank you.

Ekin

···

On 15 May 2014 21:35, Elena Pourmal <epourmal@hdfgroup.org> wrote:

Ekin,

On May 15, 2014, at 1:42 PM, Ekin Akoglu <ekin@ims.metu.edu.tr> wrote:

Dear Elena,

Changing to the directory hdf5-1.8.13/fortran/examples and then issuing

$ h5fc -o h5_crtdat h5_crtdat.f90

works. However, the check-install complains about not being able to open
h5_crtdat.o to write, which already exists. I checked the permissions of
that file and they are correct: 644, so write is allowed.

Do you have an idea?

No idea at this point. We couldn't reproduce the problem here on one of
our machines with Intel Fortran compiler.

Could you please try to run run-fortran-ex.sh in that directory?

./run-fortran-ex.sh

Thank you!

Elena

Thank you,

Ekin

On 15 May 2014 19:47, Elena Pourmal <epourmal@hdfgroup.org> wrote:

Ekin,

It looks like that for some reason Fortran compiler cannot write *.o
file. Could it be that you ran out of space? Is there quota on your system?
Was /tmp partition full?

I would try to run make check-install the second time, or go to
/usr/local/hdf5-1.8.13/share/hdf5_examples/fortran and try to run the
following command

../../../bin/h5fc -o h5_crtdat h5_crtdat.f90

and see if it works.

Elena
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Elena Pourmal The HDF Group http://hdfgroup.org
1800 So. Oak St., Suite 203, Champaign IL 61820
217.531.6112
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

On May 15, 2014, at 10:30 AM, Ekin Akoglu <ekin@ims.metu.edu.tr> wrote:

Dear Elena,

The OS is 64-bit Debian Wheezy 7.5. The compiler is Intel Fortran
Compiler 2013 SP1 Update 3, which is exactly 14.0.3 20140422. My GCC
version is 4.7.2. I built and installed HDF5 as follows:

$ ./configure --prefix=/usr/local/hdf5-1.8.13 --enable-fortran
--enable-fortran2003
$ make
$ make check
# make install
$ make check-install

Everything except the "make check-install" step worked flawlessly.

Thank you.

Kind regards,

Ekin

On 15 May 2014 17:11, Elena Pourmal <epourmal@hdfgroup.org> wrote:

Ekin,

Could you please provide OS and compiler information? It would also help
if you post the outputs of the commands used to build and install the HDF5
libraries.

Thank you!

Elena
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Elena Pourmal The HDF Group http://hdfgroup.org
1800 So. Oak St., Suite 203, Champaign IL 61820
217.531.6112
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

On May 15, 2014, at 9:10 AM, Ekin Akoglu <ekin@ims.metu.edu.tr> wrote:

Dear all,

I have just installed the HDF5 version 1.8.13 and the check-install
process failed with:

============================
Testing run-fortran-ex.sh

################# h5_crtdat #################
error: can't open file h5_crtdat.o for write
compilation aborted for h5_crtdat.f90 (code 1)
messed up compiling h5_crtdat.f90
rm: cannot remove `*.o': No such file or directory
rm: cannot remove `*.h5': No such file or directory

make[3]: *** [installcheck-local] Error 1
make[3]: Leaving directory
`/home/ekin/Tools/hdf5-1.8.13/fortran/examples'
make[2]: *** [installcheck-local] Error 1
make[2]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran'
make[1]: *** [installcheck-recursive] Error 1
make[1]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran'
make: *** [installcheck-recursive] Error 1

Regards,

Ekin

On 15 May 2014 15:20, <help@hdfgroup.org> wrote:

To view from a browser see:
   http://www.hdfgroup.org/newsletters/newsletter140.html

------------------------------------------------------------
--------------
The HDF Group Home Page: http://www.hdfgroup.org/
Support Services: http://www.hdfgroup.org/
services/
------------------------------------------------------------
--------------

                            Newsletter #140
                             May 15, 2014

CONTENTS
. Release of HDF5-1.8.13

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- -

Release of HDF5 1.8.13

The HDF5-1.8.13 release is now available, and can be downloaded from the
HDF Group Downloads page:

    http://www.hdfgroup.org/downloads/

It can also be obtained directly from:

    http://www.hdfgroup.org/HDF5/release/obtain5.html

HDF5-1.8.13 is a minor release, with a few new features and changes.
Important changes include:

o The H5free_memory (C) api was added to free memory that was allocated
   by HDF5 API calls. This was added specifically for Windows, but may
be
   useful anywhere that the library uses a different memory manager than
   the application.

o New wrappers were added for C++ (many) and Fortran
   (h5pset_file_image_f and h5pget_file_image_f).

o Mac OS X 10.9 Mavericks is now supported.

o Many improvements were added in support of CMake, including the
   addition of support for CMake 2.8.11.

o Improvements were added to the Core VFD (or Memory VFD).

o The following changes were made to Parallel HDF5:

   - The MPI-POSIX VFD was removed. Application developers should
     always use the MPI-IO VFD.

   - Parallel HDF5 now supports collective I/O on point selections.

o A few changes were added to the tools (h5diff, h5dump, and h5repack).

This release contains many other changes that are not listed here.
Please be sure to read the Release Notes for a comprehensive list of
new features and changes:

   http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.13-RELEASE.txt

Changes that affect maintainers of HDF5-dependent applications are
listed in "HDF5 Software Changes from Release to Release". See:

   http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html

Future Changes to Supported Platforms
-------------------------------------

Please be aware that after this release, we will be moving to
CMake 3.0, and will add testing for VS 2013. VS 2012 will remain
the standard.

In addition, we will only support Cygwin built with CMake, and will
be dropping VS 2010.

-------------------------------------------------------------
For questions regarding these or other HDF issues, contact:

   help@hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-
forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org

http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org

http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org

http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org

http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org

http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org

http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

Ekin,

Thank you for checking! It looks like the script has an issue on your system. I'll enter a bug report.

Elena

···

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Elena Pourmal The HDF Group http://hdfgroup.org
1800 So. Oak St., Suite 203, Champaign IL 61820
217.531.6112
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

On May 15, 2014, at 3:02 PM, Ekin Akoglu <ekin@ims.metu.edu.tr> wrote:

Dear Elena,

Running ./run-fortran-ex.sh gives a similar error:

################# h5_crtdat #################
./run-fortran-ex.sh: 57: ./run-fortran-ex.sh: ../../..//bin/h5fc: not found
messed up compiling h5_crtdat.f90
rm: cannot remove `*.o': No such file or directory
rm: cannot remove `*.h5': No such file or directory

However, I checked and h5fc is in my PATH.

Thank you.

Ekin

On 15 May 2014 21:35, Elena Pourmal <epourmal@hdfgroup.org> wrote:
Ekin,

On May 15, 2014, at 1:42 PM, Ekin Akoglu <ekin@ims.metu.edu.tr> wrote:

Dear Elena,

Changing to the directory hdf5-1.8.13/fortran/examples and then issuing

$ h5fc -o h5_crtdat h5_crtdat.f90

works. However, the check-install complains about not being able to open h5_crtdat.o to write, which already exists. I checked the permissions of that file and they are correct: 644, so write is allowed.

Do you have an idea?

No idea at this point. We couldn't reproduce the problem here on one of our machines with Intel Fortran compiler.

Could you please try to run run-fortran-ex.sh in that directory?

./run-fortran-ex.sh

Thank you!

Elena

Thank you,

Ekin

On 15 May 2014 19:47, Elena Pourmal <epourmal@hdfgroup.org> wrote:
Ekin,

It looks like that for some reason Fortran compiler cannot write *.o file. Could it be that you ran out of space? Is there quota on your system? Was /tmp partition full?

I would try to run make check-install the second time, or go to /usr/local/hdf5-1.8.13/share/hdf5_examples/fortran and try to run the following command

../../../bin/h5fc -o h5_crtdat h5_crtdat.f90

and see if it works.

Elena
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Elena Pourmal The HDF Group http://hdfgroup.org
1800 So. Oak St., Suite 203, Champaign IL 61820
217.531.6112
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

On May 15, 2014, at 10:30 AM, Ekin Akoglu <ekin@ims.metu.edu.tr> wrote:

Dear Elena,

The OS is 64-bit Debian Wheezy 7.5. The compiler is Intel Fortran Compiler 2013 SP1 Update 3, which is exactly 14.0.3 20140422. My GCC version is 4.7.2. I built and installed HDF5 as follows:

$ ./configure --prefix=/usr/local/hdf5-1.8.13 --enable-fortran --enable-fortran2003
$ make
$ make check
# make install
$ make check-install

Everything except the "make check-install" step worked flawlessly.

Thank you.

Kind regards,

Ekin

On 15 May 2014 17:11, Elena Pourmal <epourmal@hdfgroup.org> wrote:
Ekin,

Could you please provide OS and compiler information? It would also help if you post the outputs of the commands used to build and install the HDF5 libraries.

Thank you!

Elena
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Elena Pourmal The HDF Group http://hdfgroup.org
1800 So. Oak St., Suite 203, Champaign IL 61820
217.531.6112
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

On May 15, 2014, at 9:10 AM, Ekin Akoglu <ekin@ims.metu.edu.tr> wrote:

Dear all,

I have just installed the HDF5 version 1.8.13 and the check-install process failed with:

============================
Testing run-fortran-ex.sh

################# h5_crtdat #################
error: can't open file h5_crtdat.o for write
compilation aborted for h5_crtdat.f90 (code 1)
messed up compiling h5_crtdat.f90
rm: cannot remove `*.o': No such file or directory
rm: cannot remove `*.h5': No such file or directory

make[3]: *** [installcheck-local] Error 1
make[3]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran/examples'
make[2]: *** [installcheck-local] Error 1
make[2]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran'
make[1]: *** [installcheck-recursive] Error 1
make[1]: Leaving directory `/home/ekin/Tools/hdf5-1.8.13/fortran'
make: *** [installcheck-recursive] Error 1

Regards,

Ekin

On 15 May 2014 15:20, <help@hdfgroup.org> wrote:

To view from a browser see:
   http://www.hdfgroup.org/newsletters/newsletter140.html

--------------------------------------------------------------------------
The HDF Group Home Page: http://www.hdfgroup.org/
Support Services: http://www.hdfgroup.org/services/
--------------------------------------------------------------------------

                            Newsletter #140
                             May 15, 2014

CONTENTS
. Release of HDF5-1.8.13

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Release of HDF5 1.8.13

The HDF5-1.8.13 release is now available, and can be downloaded from the
HDF Group Downloads page:

    http://www.hdfgroup.org/downloads/

It can also be obtained directly from:

    http://www.hdfgroup.org/HDF5/release/obtain5.html

HDF5-1.8.13 is a minor release, with a few new features and changes.
Important changes include:

o The H5free_memory (C) api was added to free memory that was allocated
   by HDF5 API calls. This was added specifically for Windows, but may be
   useful anywhere that the library uses a different memory manager than
   the application.

o New wrappers were added for C++ (many) and Fortran
   (h5pset_file_image_f and h5pget_file_image_f).

o Mac OS X 10.9 Mavericks is now supported.

o Many improvements were added in support of CMake, including the
   addition of support for CMake 2.8.11.

o Improvements were added to the Core VFD (or Memory VFD).

o The following changes were made to Parallel HDF5:

   - The MPI-POSIX VFD was removed. Application developers should
     always use the MPI-IO VFD.

   - Parallel HDF5 now supports collective I/O on point selections.

o A few changes were added to the tools (h5diff, h5dump, and h5repack).

This release contains many other changes that are not listed here.
Please be sure to read the Release Notes for a comprehensive list of
new features and changes:

   http://www.hdfgroup.org/ftp/HDF5/current/src/hdf5-1.8.13-RELEASE.txt

Changes that affect maintainers of HDF5-dependent applications are
listed in "HDF5 Software Changes from Release to Release". See:

   http://www.hdfgroup.org/HDF5/doc/ADGuide/Changes.html

Future Changes to Supported Platforms
-------------------------------------

Please be aware that after this release, we will be moving to
CMake 3.0, and will add testing for VS 2013. VS 2012 will remain
the standard.

In addition, we will only support Cygwin built with CMake, and will
be dropping VS 2010.

-------------------------------------------------------------
For questions regarding these or other HDF issues, contact:

   help@hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://mail.lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org