h5dopen returns error

Gompie · August 4, 2015, 5:42pm

Hi
I am trying to read a hdf5 file in fortran95 ( gfortran). Peice of code is

INTEGER(HID_T) :: file_id ! File identifier
INTEGER(HID_T) :: dset_id ! Dataset identifier

INTEGER :: error ! Error flag
INTEGER :: i, j

INTEGER, DIMENSION(96,12) :: dset_data, data_out ! Data buffers
INTEGER(HSIZE_T), DIMENSION(2) :: data_dims

filename='satfilename'

CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)

CALL h5dopen_f(file_id,"BeamTime", dset_id, error)

print *,"Data Set(ATMS) ID ERROR",dset_id, error .
The h5dopen_f returns error as -1.

Later on when I use

CALL h5dread_f(dset_id, H5T_STD_I64BE, data_out, data_dims, error)

error -1 is returned from this function as well and I get incorrect values
of my variable in data_out.

Can you help
Gompie

The h5dump of my hdf5 file has

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED
) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

miller86 · August 4, 2015, 6:52pm

Are you sure you are getting a valid file_id back from the h5fopen_f call? Are you by chance missing an extension on the filename such as 'satfilename.h5' and is the dataset 'BeamTime' in the 'root group' of the file or perhaps some sub-group?

Mark

···

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 10:42 AM
To: "hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>" <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: [Hdf-forum] h5dopen returns error

Hi
I am trying to read a hdf5 file in fortran95 ( gfortran). Peice of code is

INTEGER(HID_T) :: file_id ! File identifier
INTEGER(HID_T) :: dset_id ! Dataset identifier

INTEGER :: error ! Error flag
INTEGER :: i, j

INTEGER, DIMENSION(96,12) :: dset_data, data_out ! Data buffers
INTEGER(HSIZE_T), DIMENSION(2) :: data_dims

filename='satfilename'

CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)

CALL h5dopen_f(file_id,"BeamTime", dset_id, error)

print *,"Data Set(ATMS) ID ERROR",dset_id, error .
The h5dopen_f returns error as -1.

Later on when I use

CALL h5dread_f(dset_id, H5T_STD_I64BE, data_out, data_dims, error)

error -1 is returned from this function as well and I get incorrect values of my variable in data_out.

Can you help
Gompie

The h5dump of my hdf5 file has

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

Gompie · August 4, 2015, 7:03pm

Thanks Mark !!!
Filename is complete. The file_id that is returned from hdfopen_f
(filename, H5F_ACC_RDONLY_F, file_id, error) is 16777217 and
error code is 0.
How do I find if 'BeamTime' is in root group or sub group ?

The H5Dump is as below I guess the BeamTime is inside a GROUP "All_Data",

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED
) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

Gompie

···

On Tue, Aug 4, 2015 at 2:52 PM, Miller, Mark C. <miller86@llnl.gov> wrote:

Are you sure you are getting a valid file_id back from the h5fopen_f call?
Are you by chance missing an extension on the filename such as
'satfilename.h5' and is the dataset 'BeamTime' in the 'root group' of the
file or perhaps some sub-group?

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of Richa
Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 10:42 AM
To: "hdf-forum@lists.hdfgroup.org" <hdf-forum@lists.hdfgroup.org>
Subject: [Hdf-forum] h5dopen returns error

Hi
I am trying to read a hdf5 file in fortran95 ( gfortran). Peice of code is

INTEGER(HID_T) :: file_id ! File identifier
  INTEGER(HID_T) :: dset_id ! Dataset identifier

  INTEGER :: error ! Error flag
  INTEGER :: i, j

  INTEGER, DIMENSION(96,12) :: dset_data, data_out ! Data buffers
  INTEGER(HSIZE_T), DIMENSION(2) :: data_dims

filename='satfilename'

CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)

  CALL h5dopen_f(file_id,"BeamTime", dset_id, error)

print *,"Data Set(ATMS) ID ERROR",dset_id, error .
The h5dopen_f returns error as -1.

Later on when I use

CALL h5dread_f(dset_id, H5T_STD_I64BE, data_out, data_dims, error)

error -1 is returned from this function as well and I get incorrect
values of my variable in data_out.

Can you help
Gompie

The h5dump of my hdf5 file has

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED,
H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

Corey_Bettenhausen · August 4, 2015, 7:17pm

‘h5dump -n <FILENAME>’ will give you a nice list of all of the datasets in the HDF5 file with their full paths.
-Corey

···

On Aug 4, 2015, at 3:03 PM, Richa Mathur <gompiemathur@gmail.com> wrote:

Thanks Mark !!!
Filename is complete. The file_id that is returned from hdfopen_f (filename, H5F_ACC_RDONLY_F, file_id, error) is 16777217 and error code is 0.
How do I find if 'BeamTime' is in root group or sub group ?

The H5Dump is as below I guess the BeamTime is inside a GROUP "All_Data",

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

Gompie

On Tue, Aug 4, 2015 at 2:52 PM, Miller, Mark C. <miller86@llnl.gov> wrote:
Are you sure you are getting a valid file_id back from the h5fopen_f call? Are you by chance missing an extension on the filename such as 'satfilename.h5' and is the dataset 'BeamTime' in the 'root group' of the file or perhaps some sub-group?

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 10:42 AM
To: "hdf-forum@lists.hdfgroup.org" <hdf-forum@lists.hdfgroup.org>
Subject: [Hdf-forum] h5dopen returns error

Hi
I am trying to read a hdf5 file in fortran95 ( gfortran). Peice of code is

INTEGER(HID_T) :: file_id ! File identifier
  INTEGER(HID_T) :: dset_id ! Dataset identifier

  INTEGER :: error ! Error flag
  INTEGER :: i, j

  INTEGER, DIMENSION(96,12) :: dset_data, data_out ! Data buffers
  INTEGER(HSIZE_T), DIMENSION(2) :: data_dims

filename='satfilename'

CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)

  CALL h5dopen_f(file_id,"BeamTime", dset_id, error)

print *,"Data Set(ATMS) ID ERROR",dset_id, error .
The h5dopen_f returns error as -1.

Later on when I use

CALL h5dread_f(dset_id, H5T_STD_I64BE, data_out, data_dims, error)

error -1 is returned from this function as well and I get incorrect values of my variable in data_out.

Can you help
Gompie

The h5dump of my hdf5 file has

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

miller86 · August 4, 2015, 7:11pm

yeah, agree. "BeamTime" is in group "All_Data". To get to BeamTime, you have to H5Gopen the group and use the hid_t you get from that group in place of 'file_id' arg in h5dopen. Don't forget to close the group (and dataset) after you're done.

Mark

···

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 12:03 PM
To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark !!!
Filename is complete. The file_id that is returned from hdfopen_f (filename, H5F_ACC_RDONLY_F, file_id, error) is 16777217 and error code is 0.
How do I find if 'BeamTime' is in root group or sub group ?

The H5Dump is as below I guess the BeamTime is inside a GROUP "All_Data",

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

Gompie

On Tue, Aug 4, 2015 at 2:52 PM, Miller, Mark C. <miller86@llnl.gov<mailto:miller86@llnl.gov>> wrote:
Are you sure you are getting a valid file_id back from the h5fopen_f call? Are you by chance missing an extension on the filename such as 'satfilename.h5' and is the dataset 'BeamTime' in the 'root group' of the file or perhaps some sub-group?

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 10:42 AM
To: "hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>" <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: [Hdf-forum] h5dopen returns error

Hi
I am trying to read a hdf5 file in fortran95 ( gfortran). Peice of code is

INTEGER(HID_T) :: file_id ! File identifier
INTEGER(HID_T) :: dset_id ! Dataset identifier

INTEGER :: error ! Error flag
INTEGER :: i, j

INTEGER, DIMENSION(96,12) :: dset_data, data_out ! Data buffers
INTEGER(HSIZE_T), DIMENSION(2) :: data_dims

filename='satfilename'

CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)

CALL h5dopen_f(file_id,"BeamTime", dset_id, error)

print *,"Data Set(ATMS) ID ERROR",dset_id, error .
The h5dopen_f returns error as -1.

Later on when I use

CALL h5dread_f(dset_id, H5T_STD_I64BE, data_out, data_dims, error)

error -1 is returned from this function as well and I get incorrect values of my variable in data_out.

Can you help
Gompie

The h5dump of my hdf5 file has

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org<mailto:Hdf-forum@lists.hdfgroup.org>
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

miller86 · August 4, 2015, 7:13pm

Actually, I am wrong. Wasn't looking closely, BeamTime is at path "All_Data/AMS-SDR_All/BeamTime".

I don't honestly remember if in HDF5 you can pass the slash-separated string above to open the dataset itself without having to open the intervening groups or not. Try it. I think h5dopen on the string "All_Data/AMS-SDR_All/BeamTime" may work. Otherwise, you'll have to open All_Data group and then open AMS-SDR_All group before you can open BeamTime.

Mark

···

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 12:03 PM
To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark !!!
Filename is complete. The file_id that is returned from hdfopen_f (filename, H5F_ACC_RDONLY_F, file_id, error) is 16777217 and error code is 0.
How do I find if 'BeamTime' is in root group or sub group ?

The H5Dump is as below I guess the BeamTime is inside a GROUP "All_Data",

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

Gompie

On Tue, Aug 4, 2015 at 2:52 PM, Miller, Mark C. <miller86@llnl.gov<mailto:miller86@llnl.gov>> wrote:
Are you sure you are getting a valid file_id back from the h5fopen_f call? Are you by chance missing an extension on the filename such as 'satfilename.h5' and is the dataset 'BeamTime' in the 'root group' of the file or perhaps some sub-group?

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 10:42 AM
To: "hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>" <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: [Hdf-forum] h5dopen returns error

Hi
I am trying to read a hdf5 file in fortran95 ( gfortran). Peice of code is

INTEGER(HID_T) :: file_id ! File identifier
INTEGER(HID_T) :: dset_id ! Dataset identifier

INTEGER :: error ! Error flag
INTEGER :: i, j

INTEGER, DIMENSION(96,12) :: dset_data, data_out ! Data buffers
INTEGER(HSIZE_T), DIMENSION(2) :: data_dims

filename='satfilename'

CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)

CALL h5dopen_f(file_id,"BeamTime", dset_id, error)

print *,"Data Set(ATMS) ID ERROR",dset_id, error .
The h5dopen_f returns error as -1.

Later on when I use

CALL h5dread_f(dset_id, H5T_STD_I64BE, data_out, data_dims, error)

error -1 is returned from this function as well and I get incorrect values of my variable in data_out.

Can you help
Gompie

The h5dump of my hdf5 file has

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org<mailto:Hdf-forum@lists.hdfgroup.org>
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

Gompie · August 4, 2015, 7:45pm

Thanks Mark and Corey.

after CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)
I gave CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr) as the
first call to open the group and got grp_hdrerr as -1.
I guess there is an error opening the group All_data.

the h5dump -n output is

HDF5
"SAMS_npp_d20150728_t2359556_e0000273_b19431_c20150729063134831043_nasa_ops.h5"
{
FILE_CONTENTS {
group /
group /All_Data
group /All_Data/AMS-SDR_All
dataset /All_Data/AMS-SDR_All/BeamTime
dataset /All_Data/AMS-SDR_All/BrightnessTemperature
dataset /All_Data/AMS-SDR_All/BrightnessTemperatureFactors

Any help....

···

On Tue, Aug 4, 2015 at 3:11 PM, Miller, Mark C. <miller86@llnl.gov> wrote:

yeah, agree. "BeamTime" is in group "All_Data". To get to BeamTime, you
have to H5Gopen the group and use the hid_t you get from that group in
place of 'file_id' arg in h5dopen. Don't forget to close the group (and
dataset) after you're done.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of Richa
Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 12:03 PM
To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark !!!
Filename is complete. The file_id that is returned from hdfopen_f
(filename, H5F_ACC_RDONLY_F, file_id, error) is 16777217 and
error code is 0.
How do I find if 'BeamTime' is in root group or sub group ?

The H5Dump is as below I guess the BeamTime is inside a GROUP "All_Data",

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED,
H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

Gompie

On Tue, Aug 4, 2015 at 2:52 PM, Miller, Mark C. <miller86@llnl.gov> wrote:

Are you sure you are getting a valid file_id back from the h5fopen_f
call? Are you by chance missing an extension on the filename such as
'satfilename.h5' and is the dataset 'BeamTime' in the 'root group' of the
file or perhaps some sub-group?

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of
Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 10:42 AM
To: "hdf-forum@lists.hdfgroup.org" <hdf-forum@lists.hdfgroup.org>
Subject: [Hdf-forum] h5dopen returns error

Hi
I am trying to read a hdf5 file in fortran95 ( gfortran). Peice of code is

INTEGER(HID_T) :: file_id ! File identifier
  INTEGER(HID_T) :: dset_id ! Dataset identifier

  INTEGER :: error ! Error flag
  INTEGER :: i, j

  INTEGER, DIMENSION(96,12) :: dset_data, data_out ! Data buffers
  INTEGER(HSIZE_T), DIMENSION(2) :: data_dims

filename='satfilename'

CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)

  CALL h5dopen_f(file_id,"BeamTime", dset_id, error)

print *,"Data Set(ATMS) ID ERROR",dset_id, error .
The h5dopen_f returns error as -1.

Later on when I use

CALL h5dread_f(dset_id, H5T_STD_I64BE, data_out, data_dims, error)

error -1 is returned from this function as well and I get incorrect
values of my variable in data_out.

Can you help
Gompie

The h5dump of my hdf5 file has

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED,
H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

Gompie · August 4, 2015, 7:48pm

Also the file_id returned from CALL h5fopen_f(filename, H5F_ACC_RDONLY_F,
file_id, error) is 16777217 an unusual number for a file_id.

···

On Tue, Aug 4, 2015 at 3:45 PM, Richa Mathur <gompiemathur@gmail.com> wrote:

Thanks Mark and Corey.

   after CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)
I gave CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr) as the
first call to open the group and got grp_hdrerr as -1.
I guess there is an error opening the group All_data.

the h5dump -n output is

HDF5
"SAMS_npp_d20150728_t2359556_e0000273_b19431_c20150729063134831043_nasa_ops.h5"
{
FILE_CONTENTS {
group /
group /All_Data
group /All_Data/AMS-SDR_All
dataset /All_Data/AMS-SDR_All/BeamTime
dataset /All_Data/AMS-SDR_All/BrightnessTemperature
dataset /All_Data/AMS-SDR_All/BrightnessTemperatureFactors

Any help....

On Tue, Aug 4, 2015 at 3:11 PM, Miller, Mark C. <miller86@llnl.gov> wrote:

yeah, agree. "BeamTime" is in group "All_Data". To get to BeamTime, you
have to H5Gopen the group and use the hid_t you get from that group in
place of 'file_id' arg in h5dopen. Don't forget to close the group (and
dataset) after you're done.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of
Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 12:03 PM
To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark !!!
Filename is complete. The file_id that is returned from hdfopen_f
(filename, H5F_ACC_RDONLY_F, file_id, error) is 16777217 and
error code is 0.
How do I find if 'BeamTime' is in root group or sub group ?

The H5Dump is as below I guess the BeamTime is inside a GROUP "All_Data",

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED,
H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

Gompie

On Tue, Aug 4, 2015 at 2:52 PM, Miller, Mark C. <miller86@llnl.gov> >> wrote:

Are you sure you are getting a valid file_id back from the h5fopen_f
call? Are you by chance missing an extension on the filename such as
'satfilename.h5' and is the dataset 'BeamTime' in the 'root group' of the
file or perhaps some sub-group?

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of
Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 10:42 AM
To: "hdf-forum@lists.hdfgroup.org" <hdf-forum@lists.hdfgroup.org>
Subject: [Hdf-forum] h5dopen returns error

Hi
I am trying to read a hdf5 file in fortran95 ( gfortran). Peice of code
is

INTEGER(HID_T) :: file_id ! File identifier
  INTEGER(HID_T) :: dset_id ! Dataset identifier

  INTEGER :: error ! Error flag
  INTEGER :: i, j

  INTEGER, DIMENSION(96,12) :: dset_data, data_out ! Data buffers
  INTEGER(HSIZE_T), DIMENSION(2) :: data_dims

filename='satfilename'

CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)

  CALL h5dopen_f(file_id,"BeamTime", dset_id, error)

print *,"Data Set(ATMS) ID ERROR",dset_id, error .
The h5dopen_f returns error as -1.

Later on when I use

CALL h5dread_f(dset_id, H5T_STD_I64BE, data_out, data_dims, error)

error -1 is returned from this function as well and I get incorrect
values of my variable in data_out.

Can you help
Gompie

The h5dump of my hdf5 file has

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED,
H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

Corey_Bettenhausen · August 4, 2015, 7:51pm

You probably need to specify “/All_Data” (note the forward slash) as your group.
-Corey

···

On Aug 4, 2015, at 3:45 PM, Richa Mathur <gompiemathur@gmail.com> wrote:

Thanks Mark and Corey.

   after CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)
I gave CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr) as the first call to open the group and got grp_hdrerr as -1.
I guess there is an error opening the group All_data.

the h5dump -n output is

HDF5 "SAMS_npp_d20150728_t2359556_e0000273_b19431_c20150729063134831043_nasa_ops.h5" {
FILE_CONTENTS {
group /
group /All_Data
group /All_Data/AMS-SDR_All
dataset /All_Data/AMS-SDR_All/BeamTime
dataset /All_Data/AMS-SDR_All/BrightnessTemperature
dataset /All_Data/AMS-SDR_All/BrightnessTemperatureFactors

Any help....

On Tue, Aug 4, 2015 at 3:11 PM, Miller, Mark C. <miller86@llnl.gov> wrote:
yeah, agree. "BeamTime" is in group "All_Data". To get to BeamTime, you have to H5Gopen the group and use the hid_t you get from that group in place of 'file_id' arg in h5dopen. Don't forget to close the group (and dataset) after you're done.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 12:03 PM
To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark !!!
Filename is complete. The file_id that is returned from hdfopen_f (filename, H5F_ACC_RDONLY_F, file_id, error) is 16777217 and error code is 0.
How do I find if 'BeamTime' is in root group or sub group ?

The H5Dump is as below I guess the BeamTime is inside a GROUP "All_Data",

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

Gompie

On Tue, Aug 4, 2015 at 2:52 PM, Miller, Mark C. <miller86@llnl.gov> wrote:
Are you sure you are getting a valid file_id back from the h5fopen_f call? Are you by chance missing an extension on the filename such as 'satfilename.h5' and is the dataset 'BeamTime' in the 'root group' of the file or perhaps some sub-group?

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 10:42 AM
To: "hdf-forum@lists.hdfgroup.org" <hdf-forum@lists.hdfgroup.org>
Subject: [Hdf-forum] h5dopen returns error

Hi
I am trying to read a hdf5 file in fortran95 ( gfortran). Peice of code is

INTEGER(HID_T) :: file_id ! File identifier
  INTEGER(HID_T) :: dset_id ! Dataset identifier

  INTEGER :: error ! Error flag
  INTEGER :: i, j

  INTEGER, DIMENSION(96,12) :: dset_data, data_out ! Data buffers
  INTEGER(HSIZE_T), DIMENSION(2) :: data_dims

filename='satfilename'

CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)

  CALL h5dopen_f(file_id,"BeamTime", dset_id, error)

print *,"Data Set(ATMS) ID ERROR",dset_id, error .
The h5dopen_f returns error as -1.

Later on when I use

CALL h5dread_f(dset_id, H5T_STD_I64BE, data_out, data_dims, error)

error -1 is returned from this function as well and I get incorrect values of my variable in data_out.

Can you help
Gompie

The h5dump of my hdf5 file has

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

christian.oyarzun · August 4, 2015, 7:53pm

It is case sensitive. it should be:

CALL h5gopen_f(file_id,"All_Data" , grp_id1, grp_hdferr)

not:

CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr)

—Christian

···

On Aug 4, 2015, at 3:45 PM, Richa Mathur <gompiemathur@gmail.com> wrote:

Thanks Mark and Corey.

   after CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)
I gave CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr) as the first call to open the group and got grp_hdrerr as -1.
I guess there is an error opening the group All_data.

the h5dump -n output is

HDF5 "SAMS_npp_d20150728_t2359556_e0000273_b19431_c20150729063134831043_nasa_ops.h5" {
FILE_CONTENTS {
group /
group /All_Data
group /All_Data/AMS-SDR_All
dataset /All_Data/AMS-SDR_All/BeamTime
dataset /All_Data/AMS-SDR_All/BrightnessTemperature
dataset /All_Data/AMS-SDR_All/BrightnessTemperatureFactors

Any help....

On Tue, Aug 4, 2015 at 3:11 PM, Miller, Mark C. <miller86@llnl.gov <mailto:miller86@llnl.gov>> wrote:
yeah, agree. "BeamTime" is in group "All_Data". To get to BeamTime, you have to H5Gopen the group and use the hid_t you get from that group in place of 'file_id' arg in h5dopen. Don't forget to close the group (and dataset) after you're done.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org <mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com <mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org <mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 12:03 PM
To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org <mailto:hdf-forum@lists.hdfgroup.org>>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark !!!
Filename is complete. The file_id that is returned from hdfopen_f (filename, H5F_ACC_RDONLY_F, file_id, error) is 16777217 and error code is 0.
How do I find if 'BeamTime' is in root group or sub group ?

The H5Dump is as below I guess the BeamTime is inside a GROUP "All_Data",

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

Gompie

On Tue, Aug 4, 2015 at 2:52 PM, Miller, Mark C. <miller86@llnl.gov <mailto:miller86@llnl.gov>> wrote:
Are you sure you are getting a valid file_id back from the h5fopen_f call? Are you by chance missing an extension on the filename such as 'satfilename.h5' and is the dataset 'BeamTime' in the 'root group' of the file or perhaps some sub-group?

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org <mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com <mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org <mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 10:42 AM
To: "hdf-forum@lists.hdfgroup.org <mailto:hdf-forum@lists.hdfgroup.org>" <hdf-forum@lists.hdfgroup.org <mailto:hdf-forum@lists.hdfgroup.org>>
Subject: [Hdf-forum] h5dopen returns error

Hi
I am trying to read a hdf5 file in fortran95 ( gfortran). Peice of code is

INTEGER(HID_T) :: file_id ! File identifier
  INTEGER(HID_T) :: dset_id ! Dataset identifier

  INTEGER :: error ! Error flag
  INTEGER :: i, j

  INTEGER, DIMENSION(96,12) :: dset_data, data_out ! Data buffers
  INTEGER(HSIZE_T), DIMENSION(2) :: data_dims

filename='satfilename'

CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)

  CALL h5dopen_f(file_id,"BeamTime", dset_id, error)

print *,"Data Set(ATMS) ID ERROR",dset_id, error .
The h5dopen_f returns error as -1.

Later on when I use

CALL h5dread_f(dset_id, H5T_STD_I64BE, data_out, data_dims, error)

error -1 is returned from this function as well and I get incorrect values of my variable in data_out.

Can you help
Gompie

The h5dump of my hdf5 file has

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org <mailto:Hdf-forum@lists.hdfgroup.org>
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org <mailto:Hdf-forum@lists.hdfgroup.org>
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

Gompie · August 4, 2015, 8:06pm

Thanks Mark, Christian , the problem was case sensitivety and the first
level All_Data did not return any error.
Now since the path to BeamTime is All_Data/AMS-SDR_All/BeamTime I gave

CALL h5gopen_f(file_id,"All_Data" , grp_id1, grp_hdferr)
print *,"Open Group ID ID ERROR",grp_id1, grp_hdferr

CALL h5gopen_f(file_id,"AMS-SDR_All" , grp_id2, grp_hdferr) [should I
give the grp_id1 instead of file_id ?]
print *,"Open Group AMS-SDR ID ERROR",grp_id2, grp_hdferr ( here the hdferr
is -1)

CALL h5dopen_f(grp_id1,"BeamTime", dset_id, error)

Please help

···

On Tue, Aug 4, 2015 at 3:53 PM, Christian Oyarzun < christian.oyarzun@studsvik.com> wrote:

It is case sensitive. it should be:

CALL h5gopen_f(file_id,"All_Data" , grp_id1, grp_hdferr)

not:

CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr)

—Christian

On Aug 4, 2015, at 3:45 PM, Richa Mathur <gompiemathur@gmail.com> wrote:

Thanks Mark and Corey.

   after CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)
I gave CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr) as the
first call to open the group and got grp_hdrerr as -1.
I guess there is an error opening the group All_data.

the h5dump -n output is

HDF5
"SAMS_npp_d20150728_t2359556_e0000273_b19431_c20150729063134831043_nasa_ops.h5"
{
FILE_CONTENTS {
group /
group /All_Data
group /All_Data/AMS-SDR_All
dataset /All_Data/AMS-SDR_All/BeamTime
dataset /All_Data/AMS-SDR_All/BrightnessTemperature
dataset /All_Data/AMS-SDR_All/BrightnessTemperatureFactors

Any help....

On Tue, Aug 4, 2015 at 3:11 PM, Miller, Mark C. <miller86@llnl.gov> wrote:

yeah, agree. "BeamTime" is in group "All_Data". To get to BeamTime, you
have to H5Gopen the group and use the hid_t you get from that group in
place of 'file_id' arg in h5dopen. Don't forget to close the group (and
dataset) after you're done.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of
Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 12:03 PM
To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark !!!
Filename is complete. The file_id that is returned from hdfopen_f
(filename, H5F_ACC_RDONLY_F, file_id, error) is 16777217 and
error code is 0.
How do I find if 'BeamTime' is in root group or sub group ?

The H5Dump is as below I guess the BeamTime is inside a GROUP "All_Data",

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED,
H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

Gompie

On Tue, Aug 4, 2015 at 2:52 PM, Miller, Mark C. <miller86@llnl.gov> >> wrote:

Are you sure you are getting a valid file_id back from the h5fopen_f
call? Are you by chance missing an extension on the filename such as
'satfilename.h5' and is the dataset 'BeamTime' in the 'root group' of the
file or perhaps some sub-group?

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of
Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 10:42 AM
To: "hdf-forum@lists.hdfgroup.org" <hdf-forum@lists.hdfgroup.org>
Subject: [Hdf-forum] h5dopen returns error

Hi
I am trying to read a hdf5 file in fortran95 ( gfortran). Peice of code
is

INTEGER(HID_T) :: file_id ! File identifier
  INTEGER(HID_T) :: dset_id ! Dataset identifier

  INTEGER :: error ! Error flag
  INTEGER :: i, j

  INTEGER, DIMENSION(96,12) :: dset_data, data_out ! Data buffers
  INTEGER(HSIZE_T), DIMENSION(2) :: data_dims

filename='satfilename'

CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)

  CALL h5dopen_f(file_id,"BeamTime", dset_id, error)

print *,"Data Set(ATMS) ID ERROR",dset_id, error .
The h5dopen_f returns error as -1.

Later on when I use

CALL h5dread_f(dset_id, H5T_STD_I64BE, data_out, data_dims, error)

error -1 is returned from this function as well and I get incorrect
values of my variable in data_out.

Can you help
Gompie

The h5dump of my hdf5 file has

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED,
H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

miller86 · August 4, 2015, 7:48pm

Its "All_Data" with a capital 'D'. Your code snipit has a lower-case 'd'

Mark

···

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 12:45 PM
To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark and Corey.

after CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)
I gave CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr) as the first call to open the group and got grp_hdrerr as -1.
I guess there is an error opening the group All_data.

the h5dump -n output is

HDF5 "SAMS_npp_d20150728_t2359556_e0000273_b19431_c20150729063134831043_nasa_ops.h5" {
FILE_CONTENTS {
group /
group /All_Data
group /All_Data/AMS-SDR_All
dataset /All_Data/AMS-SDR_All/BeamTime
dataset /All_Data/AMS-SDR_All/BrightnessTemperature
dataset /All_Data/AMS-SDR_All/BrightnessTemperatureFactors

Any help....

On Tue, Aug 4, 2015 at 3:11 PM, Miller, Mark C. <miller86@llnl.gov<mailto:miller86@llnl.gov>> wrote:
yeah, agree. "BeamTime" is in group "All_Data". To get to BeamTime, you have to H5Gopen the group and use the hid_t you get from that group in place of 'file_id' arg in h5dopen. Don't forget to close the group (and dataset) after you're done.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 12:03 PM
To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark !!!
Filename is complete. The file_id that is returned from hdfopen_f (filename, H5F_ACC_RDONLY_F, file_id, error) is 16777217 and error code is 0.
How do I find if 'BeamTime' is in root group or sub group ?

The H5Dump is as below I guess the BeamTime is inside a GROUP "All_Data",

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

Gompie

On Tue, Aug 4, 2015 at 2:52 PM, Miller, Mark C. <miller86@llnl.gov<mailto:miller86@llnl.gov>> wrote:
Are you sure you are getting a valid file_id back from the h5fopen_f call? Are you by chance missing an extension on the filename such as 'satfilename.h5' and is the dataset 'BeamTime' in the 'root group' of the file or perhaps some sub-group?

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 10:42 AM
To: "hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>" <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: [Hdf-forum] h5dopen returns error

Hi
I am trying to read a hdf5 file in fortran95 ( gfortran). Peice of code is

INTEGER(HID_T) :: file_id ! File identifier
INTEGER(HID_T) :: dset_id ! Dataset identifier

INTEGER :: error ! Error flag
INTEGER :: i, j

INTEGER, DIMENSION(96,12) :: dset_data, data_out ! Data buffers
INTEGER(HSIZE_T), DIMENSION(2) :: data_dims

filename='satfilename'

CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)

CALL h5dopen_f(file_id,"BeamTime", dset_id, error)

print *,"Data Set(ATMS) ID ERROR",dset_id, error .
The h5dopen_f returns error as -1.

Later on when I use

CALL h5dread_f(dset_id, H5T_STD_I64BE, data_out, data_dims, error)

error -1 is returned from this function as well and I get incorrect values of my variable in data_out.

Can you help
Gompie

The h5dump of my hdf5 file has

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org<mailto:Hdf-forum@lists.hdfgroup.org>
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

Mohamad_Chaarawi · August 4, 2015, 7:48pm

strcmp(“All_data”, “All_Data”) != 0

Thanks,
Mohamad

···

From: Hdf-forum [mailto:hdf-forum-bounces@lists.hdfgroup.org] On Behalf Of Richa Mathur
Sent: Tuesday, August 04, 2015 2:45 PM
To: HDF Users Discussion List
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark and Corey.

after CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)
I gave CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr) as the first call to open the group and got grp_hdrerr as -1.
I guess there is an error opening the group All_data.

the h5dump -n output is

HDF5 "SAMS_npp_d20150728_t2359556_e0000273_b19431_c20150729063134831043_nasa_ops.h5" {
FILE_CONTENTS {
group /
group /All_Data
group /All_Data/AMS-SDR_All
dataset /All_Data/AMS-SDR_All/BeamTime
dataset /All_Data/AMS-SDR_All/BrightnessTemperature
dataset /All_Data/AMS-SDR_All/BrightnessTemperatureFactors

Any help....

On Tue, Aug 4, 2015 at 3:11 PM, Miller, Mark C. <miller86@llnl.gov<mailto:miller86@llnl.gov>> wrote:
yeah, agree. "BeamTime" is in group "All_Data". To get to BeamTime, you have to H5Gopen the group and use the hid_t you get from that group in place of 'file_id' arg in h5dopen. Don't forget to close the group (and dataset) after you're done.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 12:03 PM
To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark !!!
Filename is complete. The file_id that is returned from hdfopen_f (filename, H5F_ACC_RDONLY_F, file_id, error) is 16777217 and error code is 0.
How do I find if 'BeamTime' is in root group or sub group ?

The H5Dump is as below I guess the BeamTime is inside a GROUP "All_Data",

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

Gompie

On Tue, Aug 4, 2015 at 2:52 PM, Miller, Mark C. <miller86@llnl.gov<mailto:miller86@llnl.gov>> wrote:
Are you sure you are getting a valid file_id back from the h5fopen_f call? Are you by chance missing an extension on the filename such as 'satfilename.h5' and is the dataset 'BeamTime' in the 'root group' of the file or perhaps some sub-group?

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 10:42 AM
To: "hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>" <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: [Hdf-forum] h5dopen returns error

Hi
I am trying to read a hdf5 file in fortran95 ( gfortran). Peice of code is

INTEGER(HID_T) :: file_id ! File identifier
INTEGER(HID_T) :: dset_id ! Dataset identifier

INTEGER :: error ! Error flag
INTEGER :: i, j

INTEGER, DIMENSION(96,12) :: dset_data, data_out ! Data buffers
INTEGER(HSIZE_T), DIMENSION(2) :: data_dims

filename='satfilename'

CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)

CALL h5dopen_f(file_id,"BeamTime", dset_id, error)

print *,"Data Set(ATMS) ID ERROR",dset_id, error .
The h5dopen_f returns error as -1.

Later on when I use

CALL h5dread_f(dset_id, H5T_STD_I64BE, data_out, data_dims, error)

error -1 is returned from this function as well and I get incorrect values of my variable in data_out.

Can you help
Gompie

The h5dump of my hdf5 file has

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org<mailto:Hdf-forum@lists.hdfgroup.org>
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

miller86 · August 4, 2015, 8:24pm

Hmm. At this point, I think it may be more productive for everyone if you would review the manual, https://www.hdfgroup.org/HDF5/doc/RM/RM_H5Front.html, a bit more to be sure you are attempting to use the HDF5 interface correctly.

In particular, your 2nd call to h5gopen_f is still specfying 'file_id' for first arg when it should be specifing 'grp_id1'. AMS-SDR_All is a group that 'lives in' the "All_Data" group (grp_id1), not the root group (file_id).

Next, I am pretty certain you can just directly h5dopen_f "All_Data/AMS-SDR_All/BeamTime" and avoid all the business with the groups.

Mark

···

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 1:06 PM
To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark, Christian , the problem was case sensitivety and the first level All_Data did not return any error.
Now since the path to BeamTime is All_Data/AMS-SDR_All/BeamTime I gave

CALL h5gopen_f(file_id,"All_Data" , grp_id1, grp_hdferr)
print *,"Open Group ID ID ERROR",grp_id1, grp_hdferr

CALL h5gopen_f(file_id,"AMS-SDR_All" , grp_id2, grp_hdferr) [should I give the grp_id1 instead of file_id ?]
print *,"Open Group AMS-SDR ID ERROR",grp_id2, grp_hdferr ( here the hdferr is -1)

CALL h5dopen_f(grp_id1,"BeamTime", dset_id, error)

Please help

On Tue, Aug 4, 2015 at 3:53 PM, Christian Oyarzun <christian.oyarzun@studsvik.com<mailto:christian.oyarzun@studsvik.com>> wrote:
It is case sensitive. it should be:

CALL h5gopen_f(file_id,"All_Data" , grp_id1, grp_hdferr)

not:

CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr)

—Christian

On Aug 4, 2015, at 3:45 PM, Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>> wrote:

Thanks Mark and Corey.

after CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)
I gave CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr) as the first call to open the group and got grp_hdrerr as -1.
I guess there is an error opening the group All_data.

the h5dump -n output is

HDF5 "SAMS_npp_d20150728_t2359556_e0000273_b19431_c20150729063134831043_nasa_ops.h5" {
FILE_CONTENTS {
group /
group /All_Data
group /All_Data/AMS-SDR_All
dataset /All_Data/AMS-SDR_All/BeamTime
dataset /All_Data/AMS-SDR_All/BrightnessTemperature
dataset /All_Data/AMS-SDR_All/BrightnessTemperatureFactors

Any help....

On Tue, Aug 4, 2015 at 3:11 PM, Miller, Mark C. <miller86@llnl.gov<mailto:miller86@llnl.gov>> wrote:
yeah, agree. "BeamTime" is in group "All_Data". To get to BeamTime, you have to H5Gopen the group and use the hid_t you get from that group in place of 'file_id' arg in h5dopen. Don't forget to close the group (and dataset) after you're done.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 12:03 PM
To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark !!!
Filename is complete. The file_id that is returned from hdfopen_f (filename, H5F_ACC_RDONLY_F, file_id, error) is 16777217 and error code is 0.
How do I find if 'BeamTime' is in root group or sub group ?

The H5Dump is as below I guess the BeamTime is inside a GROUP "All_Data",

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

Gompie

On Tue, Aug 4, 2015 at 2:52 PM, Miller, Mark C. <miller86@llnl.gov<mailto:miller86@llnl.gov>> wrote:
Are you sure you are getting a valid file_id back from the h5fopen_f call? Are you by chance missing an extension on the filename such as 'satfilename.h5' and is the dataset 'BeamTime' in the 'root group' of the file or perhaps some sub-group?

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 10:42 AM
To: "hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>" <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: [Hdf-forum] h5dopen returns error

Hi
I am trying to read a hdf5 file in fortran95 ( gfortran). Peice of code is

INTEGER(HID_T) :: file_id ! File identifier
INTEGER(HID_T) :: dset_id ! Dataset identifier

INTEGER :: error ! Error flag
INTEGER :: i, j

INTEGER, DIMENSION(96,12) :: dset_data, data_out ! Data buffers
INTEGER(HSIZE_T), DIMENSION(2) :: data_dims

filename='satfilename'

CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)

CALL h5dopen_f(file_id,"BeamTime", dset_id, error)

print *,"Data Set(ATMS) ID ERROR",dset_id, error .
The h5dopen_f returns error as -1.

Later on when I use

CALL h5dread_f(dset_id, H5T_STD_I64BE, data_out, data_dims, error)

error -1 is returned from this function as well and I get incorrect values of my variable in data_out.

Can you help
Gompie

The h5dump of my hdf5 file has

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org<mailto:Hdf-forum@lists.hdfgroup.org>
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

Gompie · August 5, 2015, 1:43am

Hi Marc,
Thanks again. That link is helpful. I was able to read in the data directly
using the path in the h5read_f. I use

          INTEGER, dimension(12,96):: data_out
          data_dims(1) = 12, data_dims(2) =96
          CALL h5dread_f(dset_id,H5T_STD_I64BE , data_out, data_dims,
error) as the h5dump indicates DATA_TYPE as H5T_STF_I64BE.

But it does not read properly ( gives core dump). I compile on a x86_64
m/c gfortran.

GROUP "All_Data" {

GROUP "AMS-SDR_All" {

···

DATASET "BeamTime" {
DATATYPE H5T_STD_I64BE

Gompie

On Tue, Aug 4, 2015 at 4:24 PM, Miller, Mark C. <miller86@llnl.gov> wrote:

Hmm. At this point, I think it may be more productive for everyone if you
would review the manual,
https://www.hdfgroup.org/HDF5/doc/RM/RM_H5Front.html, a bit more to be
sure you are attempting to use the HDF5 interface correctly.

In particular, your 2nd call to h5gopen_f is still specfying 'file_id' for
first arg when it should be specifing 'grp_id1'. AMS-SDR_All is a group
that 'lives in' the "All_Data" group (grp_id1), not the root group
(file_id).

Next, I am pretty certain you can just directly h5dopen_f
"All_Data/AMS-SDR_All/BeamTime" and avoid all the business with the groups.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of Richa
Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 1:06 PM

To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark, Christian , the problem was case sensitivety and the first
level All_Data did not return any error.
Now since the path to BeamTime is All_Data/AMS-SDR_All/BeamTime I gave

CALL h5gopen_f(file_id,"All_Data" , grp_id1, grp_hdferr)
print *,"Open Group ID ID ERROR",grp_id1, grp_hdferr

  CALL h5gopen_f(file_id,"AMS-SDR_All" , grp_id2, grp_hdferr) [should I
give the grp_id1 instead of file_id ?]
print *,"Open Group AMS-SDR ID ERROR",grp_id2, grp_hdferr ( here the
hdferr is -1)

  CALL h5dopen_f(grp_id1,"BeamTime", dset_id, error)

Please help

On Tue, Aug 4, 2015 at 3:53 PM, Christian Oyarzun < > christian.oyarzun@studsvik.com> wrote:

It is case sensitive. it should be:

CALL h5gopen_f(file_id,"All_Data" , grp_id1, grp_hdferr)

not:

CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr)

—Christian

On Aug 4, 2015, at 3:45 PM, Richa Mathur <gompiemathur@gmail.com> wrote:

Thanks Mark and Corey.

   after CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)
I gave CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr) as the
first call to open the group and got grp_hdrerr as -1.
I guess there is an error opening the group All_data.

the h5dump -n output is

HDF5
"SAMS_npp_d20150728_t2359556_e0000273_b19431_c20150729063134831043_nasa_ops.h5"
{
FILE_CONTENTS {
group /
group /All_Data
group /All_Data/AMS-SDR_All
dataset /All_Data/AMS-SDR_All/BeamTime
dataset /All_Data/AMS-SDR_All/BrightnessTemperature
dataset /All_Data/AMS-SDR_All/BrightnessTemperatureFactors

Any help....

On Tue, Aug 4, 2015 at 3:11 PM, Miller, Mark C. <miller86@llnl.gov> >> wrote:

yeah, agree. "BeamTime" is in group "All_Data". To get to BeamTime, you
have to H5Gopen the group and use the hid_t you get from that group in
place of 'file_id' arg in h5dopen. Don't forget to close the group (and
dataset) after you're done.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of
Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 12:03 PM
To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark !!!
Filename is complete. The file_id that is returned from hdfopen_f
(filename, H5F_ACC_RDONLY_F, file_id, error) is 16777217 and
error code is 0.
How do I find if 'BeamTime' is in root group or sub group ?

The H5Dump is as below I guess the BeamTime is inside a GROUP "All_Data",

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED,
H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

Gompie

On Tue, Aug 4, 2015 at 2:52 PM, Miller, Mark C. <miller86@llnl.gov> >>> wrote:

Are you sure you are getting a valid file_id back from the h5fopen_f
call? Are you by chance missing an extension on the filename such as
'satfilename.h5' and is the dataset 'BeamTime' in the 'root group' of the
file or perhaps some sub-group?

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of
Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 10:42 AM
To: "hdf-forum@lists.hdfgroup.org" <hdf-forum@lists.hdfgroup.org>
Subject: [Hdf-forum] h5dopen returns error

Hi
I am trying to read a hdf5 file in fortran95 ( gfortran). Peice of code
is

INTEGER(HID_T) :: file_id ! File identifier
  INTEGER(HID_T) :: dset_id ! Dataset identifier

  INTEGER :: error ! Error flag
  INTEGER :: i, j

  INTEGER, DIMENSION(96,12) :: dset_data, data_out ! Data buffers
  INTEGER(HSIZE_T), DIMENSION(2) :: data_dims

filename='satfilename'

CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)

  CALL h5dopen_f(file_id,"BeamTime", dset_id, error)

print *,"Data Set(ATMS) ID ERROR",dset_id, error .
The h5dopen_f returns error as -1.

Later on when I use

CALL h5dread_f(dset_id, H5T_STD_I64BE, data_out, data_dims, error)

error -1 is returned from this function as well and I get incorrect
values of my variable in data_out.

Can you help
Gompie

The h5dump of my hdf5 file has

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED,
H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

miller86 · August 5, 2015, 1:58am

So, HDF5 will handle all the 'conversion' from whatever type is used to store the data in the file to whatever type you are using to store the data in memory. So, for mem_type arg to h5dread_f, all you need to do is inform HDF5 what the datatype is of the buffer (data_out) you are reading into. You have defined data_out as INTEGER in your programming language. So, I suspect the right thing to do is. . .

CALL h5dread_f(dset_id,H5T_NATIVE_INTEGER, data_out, data_dims, error)

That tells HDF5 that data_out is the caller's *native* integer type and it will convert from whatever is in the file H5T_STD_I64BE (a 64 bit big endianne integer) to that type automatically when it reads it.

Mark

···

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 6:43 PM
To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: Re: [Hdf-forum] h5dopen returns error

Hi Marc,
Thanks again. That link is helpful. I was able to read in the data directly using the path in the h5read_f. I use

          INTEGER, dimension(12,96):: data_out
          data_dims(1) = 12, data_dims(2) =96
          CALL h5dread_f(dset_id,H5T_STD_I64BE , data_out, data_dims, error) as the h5dump indicates DATA_TYPE as H5T_STF_I64BE.

But it does not read properly ( gives core dump). I compile on a x86_64 m/c gfortran.

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
Gompie

On Tue, Aug 4, 2015 at 4:24 PM, Miller, Mark C. <miller86@llnl.gov<mailto:miller86@llnl.gov>> wrote:
Hmm. At this point, I think it may be more productive for everyone if you would review the manual, https://www.hdfgroup.org/HDF5/doc/RM/RM_H5Front.html, a bit more to be sure you are attempting to use the HDF5 interface correctly.

In particular, your 2nd call to h5gopen_f is still specfying 'file_id' for first arg when it should be specifing 'grp_id1'. AMS-SDR_All is a group that 'lives in' the "All_Data" group (grp_id1), not the root group (file_id).

Next, I am pretty certain you can just directly h5dopen_f "All_Data/AMS-SDR_All/BeamTime" and avoid all the business with the groups.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 1:06 PM

To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark, Christian , the problem was case sensitivety and the first level All_Data did not return any error.
Now since the path to BeamTime is All_Data/AMS-SDR_All/BeamTime I gave

CALL h5gopen_f(file_id,"All_Data" , grp_id1, grp_hdferr)
print *,"Open Group ID ID ERROR",grp_id1, grp_hdferr

CALL h5gopen_f(file_id,"AMS-SDR_All" , grp_id2, grp_hdferr) [should I give the grp_id1 instead of file_id ?]
print *,"Open Group AMS-SDR ID ERROR",grp_id2, grp_hdferr ( here the hdferr is -1)

CALL h5dopen_f(grp_id1,"BeamTime", dset_id, error)

Please help

On Tue, Aug 4, 2015 at 3:53 PM, Christian Oyarzun <christian.oyarzun@studsvik.com<mailto:christian.oyarzun@studsvik.com>> wrote:
It is case sensitive. it should be:

CALL h5gopen_f(file_id,"All_Data" , grp_id1, grp_hdferr)

not:

CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr)

—Christian

On Aug 4, 2015, at 3:45 PM, Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>> wrote:

Thanks Mark and Corey.

after CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)
I gave CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr) as the first call to open the group and got grp_hdrerr as -1.
I guess there is an error opening the group All_data.

the h5dump -n output is

HDF5 "SAMS_npp_d20150728_t2359556_e0000273_b19431_c20150729063134831043_nasa_ops.h5" {
FILE_CONTENTS {
group /
group /All_Data
group /All_Data/AMS-SDR_All
dataset /All_Data/AMS-SDR_All/BeamTime
dataset /All_Data/AMS-SDR_All/BrightnessTemperature
dataset /All_Data/AMS-SDR_All/BrightnessTemperatureFactors

Any help....

On Tue, Aug 4, 2015 at 3:11 PM, Miller, Mark C. <miller86@llnl.gov<mailto:miller86@llnl.gov>> wrote:
yeah, agree. "BeamTime" is in group "All_Data". To get to BeamTime, you have to H5Gopen the group and use the hid_t you get from that group in place of 'file_id' arg in h5dopen. Don't forget to close the group (and dataset) after you're done.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 12:03 PM
To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark !!!
Filename is complete. The file_id that is returned from hdfopen_f (filename, H5F_ACC_RDONLY_F, file_id, error) is 16777217 and error code is 0.
How do I find if 'BeamTime' is in root group or sub group ?

The H5Dump is as below I guess the BeamTime is inside a GROUP "All_Data",

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

Gompie

On Tue, Aug 4, 2015 at 2:52 PM, Miller, Mark C. <miller86@llnl.gov<mailto:miller86@llnl.gov>> wrote:
Are you sure you are getting a valid file_id back from the h5fopen_f call? Are you by chance missing an extension on the filename such as 'satfilename.h5' and is the dataset 'BeamTime' in the 'root group' of the file or perhaps some sub-group?

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 10:42 AM
To: "hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>" <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: [Hdf-forum] h5dopen returns error

Hi
I am trying to read a hdf5 file in fortran95 ( gfortran). Peice of code is

INTEGER(HID_T) :: file_id ! File identifier
INTEGER(HID_T) :: dset_id ! Dataset identifier

INTEGER :: error ! Error flag
INTEGER :: i, j

INTEGER, DIMENSION(96,12) :: dset_data, data_out ! Data buffers
INTEGER(HSIZE_T), DIMENSION(2) :: data_dims

filename='satfilename'

CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)

CALL h5dopen_f(file_id,"BeamTime", dset_id, error)

print *,"Data Set(ATMS) ID ERROR",dset_id, error .
The h5dopen_f returns error as -1.

Later on when I use

CALL h5dread_f(dset_id, H5T_STD_I64BE, data_out, data_dims, error)

error -1 is returned from this function as well and I get incorrect values of my variable in data_out.

Can you help
Gompie

The h5dump of my hdf5 file has

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org<mailto:Hdf-forum@lists.hdfgroup.org>
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

Gompie · August 5, 2015, 2:43am

Thanks again Marc, I now dont get core dump
For H5T_STD_U16BE I am able to correctly read and the values that I
read match with the h5dump output. However for H5T_STD_U64BE
when I read using the H5T_NATIVE_INTEGER my output does not match with
h5dump.
I am using hdf5-1.8.7. If I use hdf5-1.8.13 it conflicts with the netcdf
-gfortran reader that is also a part of my code.

Is the array shape (12,22,26) indicated by the h5dump same as the one in
fortran or it gets inverted (26,22,12) ?
Gompie

···

On Tue, Aug 4, 2015 at 9:58 PM, Miller, Mark C. <miller86@llnl.gov> wrote:

So, HDF5 will handle all the 'conversion' from whatever type is used to
store the data in the file to whatever type you are using to store the data
in memory. So, for mem_type arg to h5dread_f, all you need to do is inform
HDF5 what the datatype is of the buffer (data_out) you are reading into.
You have defined data_out as INTEGER in your programming language. So, I
suspect the right thing to do is. . .

          CALL h5dread_f(dset_id,H5T_NATIVE_INTEGER, data_out, data_dims,
error)

That tells HDF5 that data_out is the caller's *native* integer type and it
will convert from whatever is in the file H5T_STD_I64BE (a 64 bit big
endianne integer) to that type automatically when it reads it.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of Richa
Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 6:43 PM

To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Subject: Re: [Hdf-forum] h5dopen returns error

Hi Marc,
Thanks again. That link is helpful. I was able to read in the data
directly using the path in the h5read_f. I use

          INTEGER, dimension(12,96):: data_out
          data_dims(1) = 12, data_dims(2) =96
          CALL h5dread_f(dset_id,H5T_STD_I64BE , data_out, data_dims,
error) as the h5dump indicates DATA_TYPE as H5T_STF_I64BE.

But it does not read properly ( gives core dump). I compile on a x86_64
m/c gfortran.

GROUP "All_Data" {

      GROUP "AMS-SDR_All" {

         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE

Gompie

On Tue, Aug 4, 2015 at 4:24 PM, Miller, Mark C. <miller86@llnl.gov> wrote:

Hmm. At this point, I think it may be more productive for everyone if you
would review the manual,
https://www.hdfgroup.org/HDF5/doc/RM/RM_H5Front.html, a bit more to be
sure you are attempting to use the HDF5 interface correctly.

In particular, your 2nd call to h5gopen_f is still specfying 'file_id'
for first arg when it should be specifing 'grp_id1'. AMS-SDR_All is a group
that 'lives in' the "All_Data" group (grp_id1), not the root group
(file_id).

Next, I am pretty certain you can just directly h5dopen_f
"All_Data/AMS-SDR_All/BeamTime" and avoid all the business with the groups.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of
Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 1:06 PM

To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark, Christian , the problem was case sensitivety and the first
level All_Data did not return any error.
Now since the path to BeamTime is All_Data/AMS-SDR_All/BeamTime I gave

CALL h5gopen_f(file_id,"All_Data" , grp_id1, grp_hdferr)
print *,"Open Group ID ID ERROR",grp_id1, grp_hdferr

  CALL h5gopen_f(file_id,"AMS-SDR_All" , grp_id2, grp_hdferr) [should I
give the grp_id1 instead of file_id ?]
print *,"Open Group AMS-SDR ID ERROR",grp_id2, grp_hdferr ( here the
hdferr is -1)

  CALL h5dopen_f(grp_id1,"BeamTime", dset_id, error)

Please help

On Tue, Aug 4, 2015 at 3:53 PM, Christian Oyarzun < >> christian.oyarzun@studsvik.com> wrote:

It is case sensitive. it should be:

CALL h5gopen_f(file_id,"All_Data" , grp_id1, grp_hdferr)

not:

CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr)

—Christian

On Aug 4, 2015, at 3:45 PM, Richa Mathur <gompiemathur@gmail.com> wrote:

Thanks Mark and Corey.

   after CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)
I gave CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr) as the
first call to open the group and got grp_hdrerr as -1.
I guess there is an error opening the group All_data.

the h5dump -n output is

HDF5
"SAMS_npp_d20150728_t2359556_e0000273_b19431_c20150729063134831043_nasa_ops.h5"
{
FILE_CONTENTS {
group /
group /All_Data
group /All_Data/AMS-SDR_All
dataset /All_Data/AMS-SDR_All/BeamTime
dataset /All_Data/AMS-SDR_All/BrightnessTemperature
dataset /All_Data/AMS-SDR_All/BrightnessTemperatureFactors

Any help....

On Tue, Aug 4, 2015 at 3:11 PM, Miller, Mark C. <miller86@llnl.gov> >>> wrote:

yeah, agree. "BeamTime" is in group "All_Data". To get to BeamTime, you
have to H5Gopen the group and use the hid_t you get from that group in
place of 'file_id' arg in h5dopen. Don't forget to close the group (and
dataset) after you're done.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of
Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 12:03 PM
To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark !!!
Filename is complete. The file_id that is returned from hdfopen_f
(filename, H5F_ACC_RDONLY_F, file_id, error) is 16777217 and
error code is 0.
How do I find if 'BeamTime' is in root group or sub group ?

The H5Dump is as below I guess the BeamTime is inside a GROUP
"All_Data",

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED,
H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

Gompie

On Tue, Aug 4, 2015 at 2:52 PM, Miller, Mark C. <miller86@llnl.gov> >>>> wrote:

Are you sure you are getting a valid file_id back from the h5fopen_f
call? Are you by chance missing an extension on the filename such as
'satfilename.h5' and is the dataset 'BeamTime' in the 'root group' of the
file or perhaps some sub-group?

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of
Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 10:42 AM
To: "hdf-forum@lists.hdfgroup.org" <hdf-forum@lists.hdfgroup.org>
Subject: [Hdf-forum] h5dopen returns error

Hi
I am trying to read a hdf5 file in fortran95 ( gfortran). Peice of
code is

INTEGER(HID_T) :: file_id ! File identifier
  INTEGER(HID_T) :: dset_id ! Dataset identifier

  INTEGER :: error ! Error flag
  INTEGER :: i, j

  INTEGER, DIMENSION(96,12) :: dset_data, data_out ! Data buffers
  INTEGER(HSIZE_T), DIMENSION(2) :: data_dims

filename='satfilename'

CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)

  CALL h5dopen_f(file_id,"BeamTime", dset_id, error)

print *,"Data Set(ATMS) ID ERROR",dset_id, error .
The h5dopen_f returns error as -1.

Later on when I use

CALL h5dread_f(dset_id, H5T_STD_I64BE, data_out, data_dims, error)

error -1 is returned from this function as well and I get incorrect
values of my variable in data_out.

Can you help
Gompie

The h5dump of my hdf5 file has

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED,
H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752,
1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

miller86 · August 5, 2015, 4:24pm

Have a look at these type definitions. . .

https://www.hdfgroup.org/HDF5/doc/RM/PredefDTypes.html

and this description of type conversion, in particular section 6.9

https://www.hdfgroup.org/HDF5/doc/UG/UG_frame11Datatypes.html#Dtransfer

I suspect the problem may have to do with signed vs. UNsigned types here.

Also, regarding array dimension ordering, see this. . .

https://www.hdfgroup.org/HDF5/doc/fortran/index.html#FortranUserNotes

Mark

···

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 7:43 PM
To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks again Marc, I now dont get core dump
For H5T_STD_U16BE I am able to correctly read and the values that I read match with the h5dump output. However for H5T_STD_U64BE
when I read using the H5T_NATIVE_INTEGER my output does not match with h5dump.
I am using hdf5-1.8.7. If I use hdf5-1.8.13 it conflicts with the netcdf -gfortran reader that is also a part of my code.

Is the array shape (12,22,26) indicated by the h5dump same as the one in fortran or it gets inverted (26,22,12) ?
Gompie

On Tue, Aug 4, 2015 at 9:58 PM, Miller, Mark C. <miller86@llnl.gov<mailto:miller86@llnl.gov>> wrote:
So, HDF5 will handle all the 'conversion' from whatever type is used to store the data in the file to whatever type you are using to store the data in memory. So, for mem_type arg to h5dread_f, all you need to do is inform HDF5 what the datatype is of the buffer (data_out) you are reading into. You have defined data_out as INTEGER in your programming language. So, I suspect the right thing to do is. . .

CALL h5dread_f(dset_id,H5T_NATIVE_INTEGER, data_out, data_dims, error)

That tells HDF5 that data_out is the caller's *native* integer type and it will convert from whatever is in the file H5T_STD_I64BE (a 64 bit big endianne integer) to that type automatically when it reads it.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 6:43 PM

To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: Re: [Hdf-forum] h5dopen returns error

Hi Marc,
Thanks again. That link is helpful. I was able to read in the data directly using the path in the h5read_f. I use

          INTEGER, dimension(12,96):: data_out
          data_dims(1) = 12, data_dims(2) =96
          CALL h5dread_f(dset_id,H5T_STD_I64BE , data_out, data_dims, error) as the h5dump indicates DATA_TYPE as H5T_STF_I64BE.

But it does not read properly ( gives core dump). I compile on a x86_64 m/c gfortran.

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
Gompie

On Tue, Aug 4, 2015 at 4:24 PM, Miller, Mark C. <miller86@llnl.gov<mailto:miller86@llnl.gov>> wrote:
Hmm. At this point, I think it may be more productive for everyone if you would review the manual, https://www.hdfgroup.org/HDF5/doc/RM/RM_H5Front.html, a bit more to be sure you are attempting to use the HDF5 interface correctly.

In particular, your 2nd call to h5gopen_f is still specfying 'file_id' for first arg when it should be specifing 'grp_id1'. AMS-SDR_All is a group that 'lives in' the "All_Data" group (grp_id1), not the root group (file_id).

Next, I am pretty certain you can just directly h5dopen_f "All_Data/AMS-SDR_All/BeamTime" and avoid all the business with the groups.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 1:06 PM

To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark, Christian , the problem was case sensitivety and the first level All_Data did not return any error.
Now since the path to BeamTime is All_Data/AMS-SDR_All/BeamTime I gave

CALL h5gopen_f(file_id,"All_Data" , grp_id1, grp_hdferr)
print *,"Open Group ID ID ERROR",grp_id1, grp_hdferr

CALL h5gopen_f(file_id,"AMS-SDR_All" , grp_id2, grp_hdferr) [should I give the grp_id1 instead of file_id ?]
print *,"Open Group AMS-SDR ID ERROR",grp_id2, grp_hdferr ( here the hdferr is -1)

CALL h5dopen_f(grp_id1,"BeamTime", dset_id, error)

Please help

On Tue, Aug 4, 2015 at 3:53 PM, Christian Oyarzun <christian.oyarzun@studsvik.com<mailto:christian.oyarzun@studsvik.com>> wrote:
It is case sensitive. it should be:

CALL h5gopen_f(file_id,"All_Data" , grp_id1, grp_hdferr)

not:

CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr)

—Christian

On Aug 4, 2015, at 3:45 PM, Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>> wrote:

Thanks Mark and Corey.

after CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)
I gave CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr) as the first call to open the group and got grp_hdrerr as -1.
I guess there is an error opening the group All_data.

the h5dump -n output is

HDF5 "SAMS_npp_d20150728_t2359556_e0000273_b19431_c20150729063134831043_nasa_ops.h5" {
FILE_CONTENTS {
group /
group /All_Data
group /All_Data/AMS-SDR_All
dataset /All_Data/AMS-SDR_All/BeamTime
dataset /All_Data/AMS-SDR_All/BrightnessTemperature
dataset /All_Data/AMS-SDR_All/BrightnessTemperatureFactors

Any help....

On Tue, Aug 4, 2015 at 3:11 PM, Miller, Mark C. <miller86@llnl.gov<mailto:miller86@llnl.gov>> wrote:
yeah, agree. "BeamTime" is in group "All_Data". To get to BeamTime, you have to H5Gopen the group and use the hid_t you get from that group in place of 'file_id' arg in h5dopen. Don't forget to close the group (and dataset) after you're done.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 12:03 PM
To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark !!!
Filename is complete. The file_id that is returned from hdfopen_f (filename, H5F_ACC_RDONLY_F, file_id, error) is 16777217 and error code is 0.
How do I find if 'BeamTime' is in root group or sub group ?

The H5Dump is as below I guess the BeamTime is inside a GROUP "All_Data",

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

Gompie

On Tue, Aug 4, 2015 at 2:52 PM, Miller, Mark C. <miller86@llnl.gov<mailto:miller86@llnl.gov>> wrote:
Are you sure you are getting a valid file_id back from the h5fopen_f call? Are you by chance missing an extension on the filename such as 'satfilename.h5' and is the dataset 'BeamTime' in the 'root group' of the file or perhaps some sub-group?

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org<mailto:hdf-forum-bounces@lists.hdfgroup.org>> on behalf of Richa Mathur <gompiemathur@gmail.com<mailto:gompiemathur@gmail.com>>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Date: Tuesday, August 4, 2015 10:42 AM
To: "hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>" <hdf-forum@lists.hdfgroup.org<mailto:hdf-forum@lists.hdfgroup.org>>
Subject: [Hdf-forum] h5dopen returns error

Hi
I am trying to read a hdf5 file in fortran95 ( gfortran). Peice of code is

INTEGER(HID_T) :: file_id ! File identifier
INTEGER(HID_T) :: dset_id ! Dataset identifier

INTEGER :: error ! Error flag
INTEGER :: i, j

INTEGER, DIMENSION(96,12) :: dset_data, data_out ! Data buffers
INTEGER(HSIZE_T), DIMENSION(2) :: data_dims

filename='satfilename'

CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)

CALL h5dopen_f(file_id,"BeamTime", dset_id, error)

print *,"Data Set(ATMS) ID ERROR",dset_id, error .
The h5dopen_f returns error as -1.

Later on when I use

CALL h5dread_f(dset_id, H5T_STD_I64BE, data_out, data_dims, error)

error -1 is returned from this function as well and I get incorrect values of my variable in data_out.

Can you help
Gompie

The h5dump of my hdf5 file has

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org<mailto:Hdf-forum@lists.hdfgroup.org>
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

Gompie · August 5, 2015, 5:50pm

Hi Marc,
Thanks Sorry the problem is when I try to read in ( var_a ) H5T_STD_I64BE (
not with H5T_STD_U64BE as stated earlier) I get numbers that donot match
the h5dump..However I am able to read in (var_b) H5T_STD_U16BE correctly
using( matches with h5dump) H5T_NATIVE_INTEGER in the hdfread. Both the
variables( var_a and var_b) that I read in is are arrays declared as
Integer in my fortran program. and compiled on Bign Endian m/c. If I
var_a as Integer*8 I get Error: There is no specific subroutine for the
generic 'h5dread_f'
Gompie

···

On Wed, Aug 5, 2015 at 12:24 PM, Miller, Mark C. <miller86@llnl.gov> wrote:

Have a look at these type definitions. . .

https://www.hdfgroup.org/HDF5/doc/RM/PredefDTypes.html

and this description of type conversion, in particular section 6.9

https://www.hdfgroup.org/HDF5/doc/UG/UG_frame11Datatypes.html#Dtransfer

I suspect the problem may have to do with signed vs. UNsigned types here.

Also, regarding array dimension ordering, see this. . .

https://www.hdfgroup.org/HDF5/doc/fortran/index.html#FortranUserNotes

*Mark*

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of Richa
Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 7:43 PM

To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks again Marc, I now dont get core dump
   For H5T_STD_U16BE I am able to correctly read and the values that I
read match with the h5dump output. However for H5T_STD_U64BE
when I read using the H5T_NATIVE_INTEGER my output does not match with
h5dump.
I am using hdf5-1.8.7. If I use hdf5-1.8.13 it conflicts with the
netcdf -gfortran reader that is also a part of my code.

Is the array shape (12,22,26) indicated by the h5dump same as the one in
fortran or it gets inverted (26,22,12) ?
Gompie

On Tue, Aug 4, 2015 at 9:58 PM, Miller, Mark C. <miller86@llnl.gov> wrote:

So, HDF5 will handle all the 'conversion' from whatever type is used to
store the data in the file to whatever type you are using to store the data
in memory. So, for mem_type arg to h5dread_f, all you need to do is inform
HDF5 what the datatype is of the buffer (data_out) you are reading into.
You have defined data_out as INTEGER in your programming language. So, I
suspect the right thing to do is. . .

          CALL h5dread_f(dset_id,H5T_NATIVE_INTEGER, data_out, data_dims,
error)

That tells HDF5 that data_out is the caller's *native* integer type and
it will convert from whatever is in the file H5T_STD_I64BE (a 64 bit big
endianne integer) to that type automatically when it reads it.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of
Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 6:43 PM

To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Subject: Re: [Hdf-forum] h5dopen returns error

Hi Marc,
Thanks again. That link is helpful. I was able to read in the data
directly using the path in the h5read_f. I use

          INTEGER, dimension(12,96):: data_out
          data_dims(1) = 12, data_dims(2) =96
          CALL h5dread_f(dset_id,H5T_STD_I64BE , data_out, data_dims,
error) as the h5dump indicates DATA_TYPE as H5T_STF_I64BE.

But it does not read properly ( gives core dump). I compile on a x86_64
m/c gfortran.

GROUP "All_Data" {

      GROUP "AMS-SDR_All" {

         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE

Gompie

On Tue, Aug 4, 2015 at 4:24 PM, Miller, Mark C. <miller86@llnl.gov> >> wrote:

Hmm. At this point, I think it may be more productive for everyone if
you would review the manual,
https://www.hdfgroup.org/HDF5/doc/RM/RM_H5Front.html, a bit more to be
sure you are attempting to use the HDF5 interface correctly.

In particular, your 2nd call to h5gopen_f is still specfying 'file_id'
for first arg when it should be specifing 'grp_id1'. AMS-SDR_All is a group
that 'lives in' the "All_Data" group (grp_id1), not the root group
(file_id).

Next, I am pretty certain you can just directly h5dopen_f
"All_Data/AMS-SDR_All/BeamTime" and avoid all the business with the groups.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of
Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 1:06 PM

To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark, Christian , the problem was case sensitivety and the first
level All_Data did not return any error.
Now since the path to BeamTime is All_Data/AMS-SDR_All/BeamTime I
gave

CALL h5gopen_f(file_id,"All_Data" , grp_id1, grp_hdferr)
print *,"Open Group ID ID ERROR",grp_id1, grp_hdferr

  CALL h5gopen_f(file_id,"AMS-SDR_All" , grp_id2, grp_hdferr) [should I
give the grp_id1 instead of file_id ?]
print *,"Open Group AMS-SDR ID ERROR",grp_id2, grp_hdferr ( here the
hdferr is -1)

  CALL h5dopen_f(grp_id1,"BeamTime", dset_id, error)

Please help

On Tue, Aug 4, 2015 at 3:53 PM, Christian Oyarzun < >>> christian.oyarzun@studsvik.com> wrote:

It is case sensitive. it should be:

CALL h5gopen_f(file_id,"All_Data" , grp_id1, grp_hdferr)

not:

CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr)

—Christian

On Aug 4, 2015, at 3:45 PM, Richa Mathur <gompiemathur@gmail.com> >>>> wrote:

Thanks Mark and Corey.

   after CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)
I gave CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr) as the
first call to open the group and got grp_hdrerr as -1.
I guess there is an error opening the group All_data.

the h5dump -n output is

HDF5
"SAMS_npp_d20150728_t2359556_e0000273_b19431_c20150729063134831043_nasa_ops.h5"
{
FILE_CONTENTS {
group /
group /All_Data
group /All_Data/AMS-SDR_All
dataset /All_Data/AMS-SDR_All/BeamTime
dataset /All_Data/AMS-SDR_All/BrightnessTemperature
dataset /All_Data/AMS-SDR_All/BrightnessTemperatureFactors

Any help....

On Tue, Aug 4, 2015 at 3:11 PM, Miller, Mark C. <miller86@llnl.gov> >>>> wrote:

yeah, agree. "BeamTime" is in group "All_Data". To get to BeamTime,
you have to H5Gopen the group and use the hid_t you get from that group in
place of 'file_id' arg in h5dopen. Don't forget to close the group (and
dataset) after you're done.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of
Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 12:03 PM
To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark !!!
Filename is complete. The file_id that is returned from hdfopen_f
(filename, H5F_ACC_RDONLY_F, file_id, error) is 16777217 and
error code is 0.
How do I find if 'BeamTime' is in root group or sub group ?

The H5Dump is as below I guess the BeamTime is inside a GROUP
"All_Data",

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED,
H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752,
1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

Gompie

On Tue, Aug 4, 2015 at 2:52 PM, Miller, Mark C. <miller86@llnl.gov> >>>>> wrote:

Are you sure you are getting a valid file_id back from the h5fopen_f
call? Are you by chance missing an extension on the filename such as
'satfilename.h5' and is the dataset 'BeamTime' in the 'root group' of the
file or perhaps some sub-group?

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of
Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 10:42 AM
To: "hdf-forum@lists.hdfgroup.org" <hdf-forum@lists.hdfgroup.org>
Subject: [Hdf-forum] h5dopen returns error

Hi
I am trying to read a hdf5 file in fortran95 ( gfortran). Peice of
code is

INTEGER(HID_T) :: file_id ! File identifier
  INTEGER(HID_T) :: dset_id ! Dataset identifier

  INTEGER :: error ! Error flag
  INTEGER :: i, j

  INTEGER, DIMENSION(96,12) :: dset_data, data_out ! Data buffers
  INTEGER(HSIZE_T), DIMENSION(2) :: data_dims

filename='satfilename'

CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)

  CALL h5dopen_f(file_id,"BeamTime", dset_id, error)

print *,"Data Set(ATMS) ID ERROR",dset_id, error .
The h5dopen_f returns error as -1.

Later on when I use

CALL h5dread_f(dset_id, H5T_STD_I64BE, data_out, data_dims, error)

error -1 is returned from this function as well and I get incorrect
values of my variable in data_out.

Can you help
Gompie

The h5dump of my hdf5 file has

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED,
H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752,
1816819231720770,
            (0,3): 1816819231738788, 1816819231756806,
1816819231774824

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org

http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

brtnfld · August 5, 2015, 7:36pm

A few things:

(1) If the integers in the dataset cannot be represented by INTEGER*4 (which I’m assuming is your native INTEGER size) then the values read from the HDF5 file will be wrong. You should be reading them
into an INTEGER*8.

(2) What is the most recent version of hdf you can use without having a conflict with netcdf?

(i) If it is 1.8.7 then you will need to promote your native integers to INTEGER*8 when you build the hdf5 library so that you get the interface for INTEGER*8. You can do this
by setting the compiler flag FCFLAGS=<compiler option> before running configure; for Intel the option is -i8, and for gfortran it’s -fdefault-integer-8

       The better option:
      (ii) If you can use hdf5 1.8.8, or greater, then you can instead use the F2003 features and pass in a pointer to h5dread, and not have to worry about if the interface is present. An example for you to look at is
           h5ex_d_rdwr_kind_F03.f90 at https://www.hdfgroup.org/HDF5/examples/api18-fortran.html

Scot

···

On Aug 5, 2015, at 12:50 PM, Richa Mathur <gompiemathur@gmail.com> wrote:

Hi Marc,
Thanks Sorry the problem is when I try to read in ( var_a ) H5T_STD_I64BE ( not with H5T_STD_U64BE as stated earlier) I get numbers that donot match the h5dump..However I am able to read in (var_b) H5T_STD_U16BE correctly using( matches with h5dump) H5T_NATIVE_INTEGER in the hdfread. Both the variables( var_a and var_b) that I read in is are arrays declared as Integer in my fortran program. and compiled on Bign Endian m/c. If I var_a as Integer*8 I get Error: There is no specific subroutine for the generic 'h5dread_f'
Gompie

On Wed, Aug 5, 2015 at 12:24 PM, Miller, Mark C. <miller86@llnl.gov> wrote:
Have a look at these type definitions. . .

https://www.hdfgroup.org/HDF5/doc/RM/PredefDTypes.html

and this description of type conversion, in particular section 6.9

https://www.hdfgroup.org/HDF5/doc/UG/UG_frame11Datatypes.html#Dtransfer

I suspect the problem may have to do with signed vs. UNsigned types here.

Also, regarding array dimension ordering, see this. . .

https://www.hdfgroup.org/HDF5/doc/fortran/index.html#FortranUserNotes

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 7:43 PM

To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks again Marc, I now dont get core dump
   For H5T_STD_U16BE I am able to correctly read and the values that I read match with the h5dump output. However for H5T_STD_U64BE
when I read using the H5T_NATIVE_INTEGER my output does not match with h5dump.
I am using hdf5-1.8.7. If I use hdf5-1.8.13 it conflicts with the netcdf -gfortran reader that is also a part of my code.

Is the array shape (12,22,26) indicated by the h5dump same as the one in fortran or it gets inverted (26,22,12) ?
Gompie

On Tue, Aug 4, 2015 at 9:58 PM, Miller, Mark C. <miller86@llnl.gov> wrote:
So, HDF5 will handle all the 'conversion' from whatever type is used to store the data in the file to whatever type you are using to store the data in memory. So, for mem_type arg to h5dread_f, all you need to do is inform HDF5 what the datatype is of the buffer (data_out) you are reading into. You have defined data_out as INTEGER in your programming language. So, I suspect the right thing to do is. . .

          CALL h5dread_f(dset_id,H5T_NATIVE_INTEGER, data_out, data_dims, error)

That tells HDF5 that data_out is the caller's *native* integer type and it will convert from whatever is in the file H5T_STD_I64BE (a 64 bit big endianne integer) to that type automatically when it reads it.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 6:43 PM

To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Subject: Re: [Hdf-forum] h5dopen returns error

Hi Marc,
Thanks again. That link is helpful. I was able to read in the data directly using the path in the h5read_f. I use

          INTEGER, dimension(12,96):: data_out
          data_dims(1) = 12, data_dims(2) =96
          CALL h5dread_f(dset_id,H5T_STD_I64BE , data_out, data_dims, error) as the h5dump indicates DATA_TYPE as H5T_STF_I64BE.

But it does not read properly ( gives core dump). I compile on a x86_64 m/c gfortran.

GROUP "All_Data" {

      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
Gompie

On Tue, Aug 4, 2015 at 4:24 PM, Miller, Mark C. <miller86@llnl.gov> wrote:
Hmm. At this point, I think it may be more productive for everyone if you would review the manual, https://www.hdfgroup.org/HDF5/doc/RM/RM_H5Front.html, a bit more to be sure you are attempting to use the HDF5 interface correctly.

In particular, your 2nd call to h5gopen_f is still specfying 'file_id' for first arg when it should be specifing 'grp_id1'. AMS-SDR_All is a group that 'lives in' the "All_Data" group (grp_id1), not the root group (file_id).

Next, I am pretty certain you can just directly h5dopen_f "All_Data/AMS-SDR_All/BeamTime" and avoid all the business with the groups.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 1:06 PM

To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark, Christian , the problem was case sensitivety and the first level All_Data did not return any error.
Now since the path to BeamTime is All_Data/AMS-SDR_All/BeamTime I gave

CALL h5gopen_f(file_id,"All_Data" , grp_id1, grp_hdferr)
print *,"Open Group ID ID ERROR",grp_id1, grp_hdferr

  CALL h5gopen_f(file_id,"AMS-SDR_All" , grp_id2, grp_hdferr) [should I give the grp_id1 instead of file_id ?]
print *,"Open Group AMS-SDR ID ERROR",grp_id2, grp_hdferr ( here the hdferr is -1)

  CALL h5dopen_f(grp_id1,"BeamTime", dset_id, error)

Please help

On Tue, Aug 4, 2015 at 3:53 PM, Christian Oyarzun <christian.oyarzun@studsvik.com> wrote:
It is case sensitive. it should be:

CALL h5gopen_f(file_id,"All_Data" , grp_id1, grp_hdferr)

not:

CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr)

—Christian

On Aug 4, 2015, at 3:45 PM, Richa Mathur <gompiemathur@gmail.com> wrote:

Thanks Mark and Corey.

   after CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)
I gave CALL h5gopen_f(file_id,"All_data" , grp_id1, grp_hdferr) as the first call to open the group and got grp_hdrerr as -1.
I guess there is an error opening the group All_data.

the h5dump -n output is

HDF5 "SAMS_npp_d20150728_t2359556_e0000273_b19431_c20150729063134831043_nasa_ops.h5" {
FILE_CONTENTS {
group /
group /All_Data
group /All_Data/AMS-SDR_All
dataset /All_Data/AMS-SDR_All/BeamTime
dataset /All_Data/AMS-SDR_All/BrightnessTemperature
dataset /All_Data/AMS-SDR_All/BrightnessTemperatureFactors

Any help....

On Tue, Aug 4, 2015 at 3:11 PM, Miller, Mark C. <miller86@llnl.gov> wrote:
yeah, agree. "BeamTime" is in group "All_Data". To get to BeamTime, you have to H5Gopen the group and use the hid_t you get from that group in place of 'file_id' arg in h5dopen. Don't forget to close the group (and dataset) after you're done.

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 12:03 PM
To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Subject: Re: [Hdf-forum] h5dopen returns error

Thanks Mark !!!
Filename is complete. The file_id that is returned from hdfopen_f (filename, H5F_ACC_RDONLY_F, file_id, error) is 16777217 and error code is 0.
How do I find if 'BeamTime' is in root group or sub group ?

The H5Dump is as below I guess the BeamTime is inside a GROUP "All_Data",

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

Gompie

On Tue, Aug 4, 2015 at 2:52 PM, Miller, Mark C. <miller86@llnl.gov> wrote:
Are you sure you are getting a valid file_id back from the h5fopen_f call? Are you by chance missing an extension on the filename such as 'satfilename.h5' and is the dataset 'BeamTime' in the 'root group' of the file or perhaps some sub-group?

Mark

From: Hdf-forum <hdf-forum-bounces@lists.hdfgroup.org> on behalf of Richa Mathur <gompiemathur@gmail.com>
Reply-To: HDF Users Discussion List <hdf-forum@lists.hdfgroup.org>
Date: Tuesday, August 4, 2015 10:42 AM
To: "hdf-forum@lists.hdfgroup.org" <hdf-forum@lists.hdfgroup.org>
Subject: [Hdf-forum] h5dopen returns error

Hi
I am trying to read a hdf5 file in fortran95 ( gfortran). Peice of code is

INTEGER(HID_T) :: file_id ! File identifier
  INTEGER(HID_T) :: dset_id ! Dataset identifier

  INTEGER :: error ! Error flag
  INTEGER :: i, j

  INTEGER, DIMENSION(96,12) :: dset_data, data_out ! Data buffers
  INTEGER(HSIZE_T), DIMENSION(2) :: data_dims

filename='satfilename'

CALL h5fopen_f(filename, H5F_ACC_RDONLY_F, file_id, error)

  CALL h5dopen_f(file_id,"BeamTime", dset_id, error)

print *,"Data Set(ATMS) ID ERROR",dset_id, error .
The h5dopen_f returns error as -1.

Later on when I use

CALL h5dread_f(dset_id, H5T_STD_I64BE, data_out, data_dims, error)

error -1 is returned from this function as well and I get incorrect values of my variable in data_out.

Can you help
Gompie

The h5dump of my hdf5 file has

GROUP "All_Data" {
      GROUP "AMS-SDR_All" {
         DATASET "BeamTime" {
            DATATYPE H5T_STD_I64BE
            DATASPACE SIMPLE { ( 12, 96 ) / ( H5S_UNLIMITED, H5S_UNLIMITED ) }
            DATA {
            (0,0): 1816819231684734, 1816819231702752, 1816819231720770,
            (0,3): 1816819231738788, 1816819231756806, 1816819231774824

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

_______________________________________________
Hdf-forum is for HDF software users discussion.
Hdf-forum@lists.hdfgroup.org
http://lists.hdfgroup.org/mailman/listinfo/hdf-forum_lists.hdfgroup.org
Twitter: https://twitter.com/hdf5

Attention! https://support.hdfgroup.org is the NEW home for documentation from The HDF Group. (Details)

h5dopen returns error